[Risolto] Impostare frequenza di aggiornamento verticale monitor
Re: Impostare frequenza di aggiornamento verticale monitor
Per caso cinnamon ha qualche tool di configurazione delle impostazioni grafiche?
Offertissima: Mi Vendo!!! Cercasi lavoro o corso di formazione finanziato in tutta italia da Roma in su, oppure in provincia di Catanzaro.
In particolare sono interessato ad opportunità su Roma.
In particolare sono interessato ad opportunità su Roma.
-
- Arciere
- Messaggi: 226
- Iscritto il: 11 febbraio 2015, 16:53
- Architettura: x86_64 (64bit)
Re: Impostare frequenza di aggiornamento verticale monitor
Qualcosa per la risoluzione del monitor e i profili ICC, niente di più.
Put the fun back into computing.
Arch 64bit con Cinnamon/Xfce4.12 su ASUS X52JB (Intel Pentium P6100, 4Gb RAM e ATI Mobility Radeon HD 5145)
Arch 64bit con Cinnamon (Intel Core i5-4690K e Asus nVidia GTX-970 Strix Direct CU II OC)
Arch 64bit con Cinnamon/Xfce4.12 su ASUS X52JB (Intel Pentium P6100, 4Gb RAM e ATI Mobility Radeon HD 5145)
Arch 64bit con Cinnamon (Intel Core i5-4690K e Asus nVidia GTX-970 Strix Direct CU II OC)
Re: Impostare frequenza di aggiornamento verticale monitor
Appunto. Sicuro che l'impostazione per la risoluzione del monitor non interferisca con quella di nvidia-settings?
Offertissima: Mi Vendo!!! Cercasi lavoro o corso di formazione finanziato in tutta italia da Roma in su, oppure in provincia di Catanzaro.
In particolare sono interessato ad opportunità su Roma.
In particolare sono interessato ad opportunità su Roma.
-
- Arciere
- Messaggi: 226
- Iscritto il: 11 febbraio 2015, 16:53
- Architettura: x86_64 (64bit)
Re: Impostare frequenza di aggiornamento verticale monitor
Non saprei, si tratta di cinnamon-settings-daemon... E comunque prima dell'aggiornamento dei driver non dava problemi
Put the fun back into computing.
Arch 64bit con Cinnamon/Xfce4.12 su ASUS X52JB (Intel Pentium P6100, 4Gb RAM e ATI Mobility Radeon HD 5145)
Arch 64bit con Cinnamon (Intel Core i5-4690K e Asus nVidia GTX-970 Strix Direct CU II OC)
Arch 64bit con Cinnamon/Xfce4.12 su ASUS X52JB (Intel Pentium P6100, 4Gb RAM e ATI Mobility Radeon HD 5145)
Arch 64bit con Cinnamon (Intel Core i5-4690K e Asus nVidia GTX-970 Strix Direct CU II OC)
Re: Impostare frequenza di aggiornamento verticale monitor
Aggiungi alla sezione Device questa riga
Option "ConnectedMonitor" "DFP"
Option "ConnectedMonitor" "DFP"
Offertissima: Mi Vendo!!! Cercasi lavoro o corso di formazione finanziato in tutta italia da Roma in su, oppure in provincia di Catanzaro.
In particolare sono interessato ad opportunità su Roma.
In particolare sono interessato ad opportunità su Roma.
-
- Arciere
- Messaggi: 226
- Iscritto il: 11 febbraio 2015, 16:53
- Architettura: x86_64 (64bit)
Re: Impostare frequenza di aggiornamento verticale monitor
Non è cambiato nulla
Put the fun back into computing.
Arch 64bit con Cinnamon/Xfce4.12 su ASUS X52JB (Intel Pentium P6100, 4Gb RAM e ATI Mobility Radeon HD 5145)
Arch 64bit con Cinnamon (Intel Core i5-4690K e Asus nVidia GTX-970 Strix Direct CU II OC)
Arch 64bit con Cinnamon/Xfce4.12 su ASUS X52JB (Intel Pentium P6100, 4Gb RAM e ATI Mobility Radeon HD 5145)
Arch 64bit con Cinnamon (Intel Core i5-4690K e Asus nVidia GTX-970 Strix Direct CU II OC)
Re: Impostare frequenza di aggiornamento verticale monitor
Posta sempre il log.
Offertissima: Mi Vendo!!! Cercasi lavoro o corso di formazione finanziato in tutta italia da Roma in su, oppure in provincia di Catanzaro.
In particolare sono interessato ad opportunità su Roma.
In particolare sono interessato ad opportunità su Roma.
-
- Arciere
- Messaggi: 226
- Iscritto il: 11 febbraio 2015, 16:53
- Architettura: x86_64 (64bit)
Re: Impostare frequenza di aggiornamento verticale monitor
Certo, scusa
Codice: Seleziona tutto
[ 13.328] (--) Log file renamed from "/var/log/Xorg.pid-557.log" to "/var/log/Xorg.0.log"
[ 13.352]
X.Org X Server 1.18.1
Release Date: 2016-02-08
[ 13.352] X Protocol Version 11, Revision 0
[ 13.352] Build Operating System: Linux 4.2.5-1-ARCH x86_64
[ 13.352] Current Operating System: Linux archcomputer 4.4.5-1-ARCH #1 SMP PREEMPT Thu Mar 10 07:38:19 CET 2016 x86_64
[ 13.352] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=00207c10-d846-4354-b73c-bbb3a3223dc7 rw
[ 13.352] Build Date: 11 February 2016 09:57:03AM
[ 13.352]
[ 13.352] Current version of pixman: 0.34.0
[ 13.352] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.352] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.352] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 18 19:51:34 2016
[ 13.375] (==) Using config file: "/etc/X11/xorg.conf"
[ 13.375] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 13.413] (==) ServerLayout "Layout0"
[ 13.413] (**) |-->Screen "Screen0" (0)
[ 13.413] (**) | |-->Monitor "Monitor0"
[ 13.413] (**) | |-->Device "Device0"
[ 13.413] (**) |-->Input Device "Keyboard0"
[ 13.413] (**) |-->Input Device "Mouse0"
[ 13.413] (**) Option "Xinerama" "0"
[ 13.413] (==) Automatically adding devices
[ 13.413] (==) Automatically enabling devices
[ 13.413] (==) Automatically adding GPU devices
[ 13.413] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 13.440] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 13.440] Entry deleted from font path.
[ 13.440] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 13.440] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 13.440] Entry deleted from font path.
[ 13.440] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 13.440] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 13.440] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.440] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 13.440] (WW) Disabling Keyboard0
[ 13.440] (WW) Disabling Mouse0
[ 13.440] (II) Loader magic: 0x81ad60
[ 13.440] (II) Module ABI versions:
[ 13.440] X.Org ANSI C Emulation: 0.4
[ 13.440] X.Org Video Driver: 20.0
[ 13.440] X.Org XInput driver : 22.1
[ 13.440] X.Org Server Extension : 9.0
[ 13.441] (++) using VT number 1
[ 13.442] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 13.442] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 13.442] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 9 paused 0
[ 13.443] (--) PCI:*(0:1:0:0) 10de:13c2:1043:8508 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 13.443] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 13.443] (II) LoadModule: "glx"
[ 13.482] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13.927] (II) Module glx: vendor="NVIDIA Corporation"
[ 13.927] compiled for 4.0.2, module version = 1.0.0
[ 13.927] Module class: X.Org Server Extension
[ 13.928] (II) NVIDIA GLX Module 361.28 Wed Feb 3 15:10:57 PST 2016
[ 13.940] (II) LoadModule: "nvidia"
[ 13.951] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 14.002] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 14.002] compiled for 4.0.2, module version = 1.0.0
[ 14.002] Module class: X.Org Video Driver
[ 14.002] (II) NVIDIA dlloader X Driver 361.28 Wed Feb 3 14:48:10 PST 2016
[ 14.002] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 14.008] (II) Loading sub module "fb"
[ 14.008] (II) LoadModule: "fb"
[ 14.022] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 14.028] (II) Module fb: vendor="X.Org Foundation"
[ 14.028] compiled for 1.18.1, module version = 1.0.0
[ 14.028] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.028] (II) Loading sub module "wfb"
[ 14.028] (II) LoadModule: "wfb"
[ 14.028] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 14.029] (II) Module wfb: vendor="X.Org Foundation"
[ 14.029] compiled for 1.18.1, module version = 1.0.0
[ 14.029] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.029] (II) Loading sub module "ramdac"
[ 14.029] (II) LoadModule: "ramdac"
[ 14.029] (II) Module "ramdac" already built-in
[ 14.043] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 14.043] (==) NVIDIA(0): RGB weight 888
[ 14.043] (==) NVIDIA(0): Default visual is TrueColor
[ 14.043] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 14.043] (**) NVIDIA(0): Option "Stereo" "0"
[ 14.043] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP-0"
[ 14.043] (**) NVIDIA(0): Option "SLI" "Off"
[ 14.043] (**) NVIDIA(0): Option "MultiGPU" "Off"
[ 14.043] (**) NVIDIA(0): Option "BaseMosaic" "off"
[ 14.043] (**) NVIDIA(0): Stereo disabled by request
Put the fun back into computing.
Arch 64bit con Cinnamon/Xfce4.12 su ASUS X52JB (Intel Pentium P6100, 4Gb RAM e ATI Mobility Radeon HD 5145)
Arch 64bit con Cinnamon (Intel Core i5-4690K e Asus nVidia GTX-970 Strix Direct CU II OC)
Arch 64bit con Cinnamon/Xfce4.12 su ASUS X52JB (Intel Pentium P6100, 4Gb RAM e ATI Mobility Radeon HD 5145)
Arch 64bit con Cinnamon (Intel Core i5-4690K e Asus nVidia GTX-970 Strix Direct CU II OC)
Re: Impostare frequenza di aggiornamento verticale monitor
Non è completo.
Offertissima: Mi Vendo!!! Cercasi lavoro o corso di formazione finanziato in tutta italia da Roma in su, oppure in provincia di Catanzaro.
In particolare sono interessato ad opportunità su Roma.
In particolare sono interessato ad opportunità su Roma.
-
- Arciere
- Messaggi: 226
- Iscritto il: 11 febbraio 2015, 16:53
- Architettura: x86_64 (64bit)
Re: Impostare frequenza di aggiornamento verticale monitor
Non me n'ero accorto scusa
Codice: Seleziona tutto
[ 12.937] (--) Log file renamed from "/var/log/Xorg.pid-567.log" to "/var/log/Xorg.0.log"
[ 12.977]
X.Org X Server 1.18.1
Release Date: 2016-02-08
[ 12.977] X Protocol Version 11, Revision 0
[ 12.977] Build Operating System: Linux 4.2.5-1-ARCH x86_64
[ 12.977] Current Operating System: Linux archcomputer 4.4.5-1-ARCH #1 SMP PREEMPT Thu Mar 10 07:38:19 CET 2016 x86_64
[ 12.977] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=00207c10-d846-4354-b73c-bbb3a3223dc7 rw
[ 12.977] Build Date: 11 February 2016 09:57:03AM
[ 12.977]
[ 12.977] Current version of pixman: 0.34.0
[ 12.977] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 12.977] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12.977] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 19 16:59:38 2016
[ 13.012] (==) Using config file: "/etc/X11/xorg.conf"
[ 13.012] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 13.072] (==) ServerLayout "Layout0"
[ 13.072] (**) |-->Screen "Screen0" (0)
[ 13.072] (**) | |-->Monitor "Monitor0"
[ 13.072] (**) | |-->Device "Device0"
[ 13.072] (**) |-->Input Device "Keyboard0"
[ 13.072] (**) |-->Input Device "Mouse0"
[ 13.072] (**) Option "Xinerama" "0"
[ 13.072] (==) Automatically adding devices
[ 13.072] (==) Automatically enabling devices
[ 13.072] (==) Automatically adding GPU devices
[ 13.072] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 13.099] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 13.099] Entry deleted from font path.
[ 13.099] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 13.099] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 13.099] Entry deleted from font path.
[ 13.099] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 13.099] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 13.099] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.099] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 13.099] (WW) Disabling Keyboard0
[ 13.099] (WW) Disabling Mouse0
[ 13.099] (II) Loader magic: 0x81ad60
[ 13.099] (II) Module ABI versions:
[ 13.099] X.Org ANSI C Emulation: 0.4
[ 13.099] X.Org Video Driver: 20.0
[ 13.099] X.Org XInput driver : 22.1
[ 13.099] X.Org Server Extension : 9.0
[ 13.100] (++) using VT number 1
[ 13.101] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 13.101] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 13.101] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 9 paused 0
[ 13.102] (--) PCI:*(0:1:0:0) 10de:13c2:1043:8508 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 13.102] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 13.102] (II) LoadModule: "glx"
[ 13.141] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13.549] (II) Module glx: vendor="NVIDIA Corporation"
[ 13.549] compiled for 4.0.2, module version = 1.0.0
[ 13.549] Module class: X.Org Server Extension
[ 13.552] (II) NVIDIA GLX Module 361.28 Wed Feb 3 15:10:57 PST 2016
[ 13.565] (II) LoadModule: "nvidia"
[ 13.585] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 13.611] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 13.611] compiled for 4.0.2, module version = 1.0.0
[ 13.611] Module class: X.Org Video Driver
[ 13.615] (II) NVIDIA dlloader X Driver 361.28 Wed Feb 3 14:48:10 PST 2016
[ 13.615] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 13.625] (II) Loading sub module "fb"
[ 13.625] (II) LoadModule: "fb"
[ 13.647] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 13.653] (II) Module fb: vendor="X.Org Foundation"
[ 13.653] compiled for 1.18.1, module version = 1.0.0
[ 13.653] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.653] (II) Loading sub module "wfb"
[ 13.653] (II) LoadModule: "wfb"
[ 13.653] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 13.654] (II) Module wfb: vendor="X.Org Foundation"
[ 13.654] compiled for 1.18.1, module version = 1.0.0
[ 13.654] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.654] (II) Loading sub module "ramdac"
[ 13.654] (II) LoadModule: "ramdac"
[ 13.654] (II) Module "ramdac" already built-in
[ 13.669] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 13.669] (==) NVIDIA(0): RGB weight 888
[ 13.669] (==) NVIDIA(0): Default visual is TrueColor
[ 13.669] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 13.669] (**) NVIDIA(0): Option "Stereo" "0"
[ 13.669] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP-0"
[ 13.669] (**) NVIDIA(0): Option "SLI" "Off"
[ 13.669] (**) NVIDIA(0): Option "MultiGPU" "Off"
[ 13.669] (**) NVIDIA(0): Option "BaseMosaic" "off"
[ 13.669] (**) NVIDIA(0): Stereo disabled by request
[ 13.669] (**) NVIDIA(0): NVIDIA SLI disabled.
[ 13.669] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[ 13.669] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP"
[ 13.669] (**) NVIDIA(0): Option "MetaModes" "DFP-0: 1920x1080_60 +0+0, DVI-I-1: 1920X1080_60 +0+0"
[ 13.669] (**) NVIDIA(0): Enabling 2D acceleration
[ 13.669] (**) NVIDIA(0): ConnectedMonitor string: "DFP"
[ 14.370] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 14.370] (--) NVIDIA(0): CRT-0
[ 14.370] (--) NVIDIA(0): DFP-0 (boot)
[ 14.370] (--) NVIDIA(0): DFP-1
[ 14.370] (--) NVIDIA(0): DFP-2
[ 14.370] (--) NVIDIA(0): DFP-3
[ 14.370] (--) NVIDIA(0): DFP-4
[ 14.370] (**) NVIDIA(0): Using ConnectedMonitor string "DFP-0".
[ 14.370] (--) NVIDIA(0): CRT-0: disconnected
[ 14.370] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 14.370] (--) NVIDIA(0):
[ 14.400] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): connected
[ 14.400] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 14.400] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 14.400] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 14.400] (--) NVIDIA(0):
[ 14.400] (--) NVIDIA(0): DFP-1: disconnected
[ 14.400] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 14.400] (--) NVIDIA(0): DFP-1: 330.0 MHz maximum pixel clock
[ 14.400] (--) NVIDIA(0):
[ 14.400] (--) NVIDIA(0): DFP-2: disconnected
[ 14.400] (--) NVIDIA(0): DFP-2: Internal DisplayPort
[ 14.400] (--) NVIDIA(0): DFP-2: 960.0 MHz maximum pixel clock
[ 14.400] (--) NVIDIA(0):
[ 14.400] (--) NVIDIA(0): DFP-3: disconnected
[ 14.400] (--) NVIDIA(0): DFP-3: Internal TMDS
[ 14.400] (--) NVIDIA(0): DFP-3: 330.0 MHz maximum pixel clock
[ 14.400] (--) NVIDIA(0):
[ 14.400] (--) NVIDIA(0): DFP-4: disconnected
[ 14.400] (--) NVIDIA(0): DFP-4: Internal TMDS
[ 14.400] (--) NVIDIA(0): DFP-4: 330.0 MHz maximum pixel clock
[ 14.400] (--) NVIDIA(0):
[ 14.400] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 14.401] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 970 (GM204-A) at PCI:1:0:0 (GPU-0)
[ 14.401] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 14.401] (--) NVIDIA(0): VideoBIOS: 84.04.1f.00.2b
[ 14.401] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 14.401] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 14.401] (**) NVIDIA(0): device BenQ XL2411Z (DFP-0) (Using EDID frequencies has
[ 14.401] (**) NVIDIA(0): been enabled on all display devices.)
[ 14.402] (II) NVIDIA(0): Validated MetaModes:
[ 14.402] (II) NVIDIA(0): "DFP-0:1920x1080_60+0+0,DVI-I-1:1920X1080_60+0+0"
[ 14.402] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 14.425] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
[ 14.425] (--) NVIDIA(0): option
[ 14.425] (--) Depth 24 pixmap format is 32 bpp
[ 14.426] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 14.426] (II) NVIDIA: access.
[ 14.428] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 14.428] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 14.428] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 14.428] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 14.428] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 14.428] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 14.428] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 14.428] (II) NVIDIA(0): Config Options in the README.
[ 15.037] (II) NVIDIA(0): Setting mode "DFP-0:1920x1080_60+0+0,DVI-I-1:1920X1080_60+0+0"
[ 15.120] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 15.120] (==) NVIDIA(0): Backing store enabled
[ 15.120] (==) NVIDIA(0): Silken mouse enabled
[ 15.121] (**) NVIDIA(0): DPMS enabled
[ 15.121] (II) Loading sub module "x11glvnd"
[ 15.121] (II) LoadModule: "x11glvnd"
[ 15.121] (II) Loading /usr/lib/xorg/modules/extensions/x11glvnd.so
[ 15.129] (II) Module x11glvnd: vendor="X.Org Foundation"
[ 15.129] compiled for 4.0.2, module version = 1.0.0
[ 15.129] Module class: X.Org Server Extension
[ 15.129] (II) x11glvnd Loading
[ 15.129] (II) Loading sub module "dri2"
[ 15.129] (II) LoadModule: "dri2"
[ 15.129] (II) Module "dri2" already built-in
[ 15.129] (II) NVIDIA(0): [DRI2] Setup complete
[ 15.129] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 15.129] (--) RandR disabled
[ 15.132] (II) Initializing extension GLX
[ 15.132] (II) Indirect GLX disabled.
[ 15.445] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 15.445] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 15.445] (II) LoadModule: "evdev"
[ 15.445] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 15.474] (II) Module evdev: vendor="X.Org Foundation"
[ 15.474] compiled for 1.18.0, module version = 2.10.1
[ 15.474] Module class: X.Org XInput Driver
[ 15.474] ABI class: X.Org XInput driver, version 22.1
[ 15.474] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 30 paused 0
[ 15.474] (II) Using input driver 'evdev' for 'Power Button'
[ 15.474] (**) Power Button: always reports core events
[ 15.474] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 15.474] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 15.474] (--) evdev: Power Button: Found keys
[ 15.474] (II) evdev: Power Button: Configuring as keyboard
[ 15.474] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event5"
[ 15.474] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 15.474] (**) Option "xkb_rules" "evdev"
[ 15.474] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 15.474] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 15.475] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 31 paused 0
[ 15.475] (II) Using input driver 'evdev' for 'Power Button'
[ 15.475] (**) Power Button: always reports core events
[ 15.475] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 15.475] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 15.475] (--) evdev: Power Button: Found keys
[ 15.475] (II) evdev: Power Button: Configuring as keyboard
[ 15.475] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event3"
[ 15.475] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 15.475] (**) Option "xkb_rules" "evdev"
[ 15.475] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 15.475] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 15.475] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 32 paused 0
[ 15.475] (II) Using input driver 'evdev' for 'Sleep Button'
[ 15.475] (**) Sleep Button: always reports core events
[ 15.475] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 15.475] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 15.475] (--) evdev: Sleep Button: Found keys
[ 15.475] (II) evdev: Sleep Button: Configuring as keyboard
[ 15.475] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event4"
[ 15.475] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 15.475] (**) Option "xkb_rules" "evdev"
[ 15.476] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[ 15.476] (II) No input driver specified, ignoring this device.
[ 15.476] (II) This device may have been added with another device file.
[ 15.476] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
[ 15.476] (II) No input driver specified, ignoring this device.
[ 15.476] (II) This device may have been added with another device file.
[ 15.476] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event18)
[ 15.476] (II) No input driver specified, ignoring this device.
[ 15.476] (II) This device may have been added with another device file.
[ 15.476] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event19)
[ 15.476] (II) No input driver specified, ignoring this device.
[ 15.476] (II) This device may have been added with another device file.
[ 15.476] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event0)
[ 15.476] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 15.530] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 33 paused 0
[ 15.530] (II) Using input driver 'evdev' for 'USB OPTICAL MOUSE'
[ 15.530] (**) USB OPTICAL MOUSE: always reports core events
[ 15.530] (**) evdev: USB OPTICAL MOUSE: Device: "/dev/input/event0"
[ 15.530] (--) evdev: USB OPTICAL MOUSE: Vendor 0x93a Product 0x2521
[ 15.530] (--) evdev: USB OPTICAL MOUSE: Found 9 mouse buttons
[ 15.530] (--) evdev: USB OPTICAL MOUSE: Found scroll wheel(s)
[ 15.530] (--) evdev: USB OPTICAL MOUSE: Found relative axes
[ 15.530] (--) evdev: USB OPTICAL MOUSE: Found x and y relative axes
[ 15.530] (II) evdev: USB OPTICAL MOUSE: Configuring as mouse
[ 15.530] (II) evdev: USB OPTICAL MOUSE: Adding scrollwheel support
[ 15.530] (**) evdev: USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 15.530] (**) evdev: USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 15.530] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:093A:2521.0001/input/input2/event0"
[ 15.530] (II) XINPUT: Adding extended input device "USB OPTICAL MOUSE" (type: MOUSE, id 9)
[ 15.530] (II) evdev: USB OPTICAL MOUSE: initialized for relative axes.
[ 15.530] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 15.530] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 15.530] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 15.530] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 15.530] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 15.530] (II) No input driver specified, ignoring this device.
[ 15.530] (II) This device may have been added with another device file.
[ 15.530] (II) config/udev: Adding input device SINO WEALTH USB KEYBOARD (/dev/input/event1)
[ 15.530] (**) SINO WEALTH USB KEYBOARD: Applying InputClass "evdev keyboard catchall"
[ 15.531] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 34 paused 0
[ 15.531] (II) Using input driver 'evdev' for 'SINO WEALTH USB KEYBOARD'
[ 15.531] (**) SINO WEALTH USB KEYBOARD: always reports core events
[ 15.531] (**) evdev: SINO WEALTH USB KEYBOARD: Device: "/dev/input/event1"
[ 15.531] (--) evdev: SINO WEALTH USB KEYBOARD: Vendor 0x258a Product 0x1
[ 15.531] (--) evdev: SINO WEALTH USB KEYBOARD: Found keys
[ 15.531] (II) evdev: SINO WEALTH USB KEYBOARD: Configuring as keyboard
[ 15.531] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:258A:0001.0002/input/input3/event1"
[ 15.531] (II) XINPUT: Adding extended input device "SINO WEALTH USB KEYBOARD" (type: KEYBOARD, id 10)
[ 15.531] (**) Option "xkb_rules" "evdev"
[ 15.531] (II) config/udev: Adding input device SINO WEALTH USB KEYBOARD (/dev/input/event2)
[ 15.531] (**) SINO WEALTH USB KEYBOARD: Applying InputClass "evdev keyboard catchall"
[ 15.531] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 35 paused 0
[ 15.531] (II) Using input driver 'evdev' for 'SINO WEALTH USB KEYBOARD'
[ 15.531] (**) SINO WEALTH USB KEYBOARD: always reports core events
[ 15.531] (**) evdev: SINO WEALTH USB KEYBOARD: Device: "/dev/input/event2"
[ 15.531] (--) evdev: SINO WEALTH USB KEYBOARD: Vendor 0x258a Product 0x1
[ 15.531] (--) evdev: SINO WEALTH USB KEYBOARD: Found keys
[ 15.531] (II) evdev: SINO WEALTH USB KEYBOARD: Configuring as keyboard
[ 15.531] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:258A:0001.0003/input/input4/event2"
[ 15.531] (II) XINPUT: Adding extended input device "SINO WEALTH USB KEYBOARD" (type: KEYBOARD, id 11)
[ 15.531] (**) Option "xkb_rules" "evdev"
[ 15.532] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/event20)
[ 15.532] (II) No input driver specified, ignoring this device.
[ 15.532] (II) This device may have been added with another device file.
[ 15.532] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/js0)
[ 15.532] (II) No input driver specified, ignoring this device.
[ 15.532] (II) This device may have been added with another device file.
[ 15.532] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/event21)
[ 15.532] (II) No input driver specified, ignoring this device.
[ 15.532] (II) This device may have been added with another device file.
[ 15.532] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/js1)
[ 15.532] (II) No input driver specified, ignoring this device.
[ 15.532] (II) This device may have been added with another device file.
[ 15.533] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/event22)
[ 15.533] (II) No input driver specified, ignoring this device.
[ 15.533] (II) This device may have been added with another device file.
[ 15.533] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/js2)
[ 15.533] (II) No input driver specified, ignoring this device.
[ 15.533] (II) This device may have been added with another device file.
[ 15.533] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/event23)
[ 15.533] (II) No input driver specified, ignoring this device.
[ 15.533] (II) This device may have been added with another device file.
[ 15.533] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/js3)
[ 15.533] (II) No input driver specified, ignoring this device.
[ 15.533] (II) This device may have been added with another device file.
[ 15.533] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 15.533] (II) No input driver specified, ignoring this device.
[ 15.533] (II) This device may have been added with another device file.
[ 15.533] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event8)
[ 15.533] (II) No input driver specified, ignoring this device.
[ 15.533] (II) This device may have been added with another device file.
[ 15.533] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event9)
[ 15.533] (II) No input driver specified, ignoring this device.
[ 15.533] (II) This device may have been added with another device file.
[ 15.534] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event10)
[ 15.534] (II) No input driver specified, ignoring this device.
[ 15.534] (II) This device may have been added with another device file.
[ 15.534] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event11)
[ 15.534] (II) No input driver specified, ignoring this device.
[ 15.534] (II) This device may have been added with another device file.
[ 15.534] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event12)
[ 15.534] (II) No input driver specified, ignoring this device.
[ 15.534] (II) This device may have been added with another device file.
[ 15.534] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event13)
[ 15.534] (II) No input driver specified, ignoring this device.
[ 15.534] (II) This device may have been added with another device file.
[ 15.534] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event14)
[ 15.534] (II) No input driver specified, ignoring this device.
[ 15.534] (II) This device may have been added with another device file.
[ 15.534] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event15)
[ 15.534] (II) No input driver specified, ignoring this device.
[ 15.534] (II) This device may have been added with another device file.
[ 15.534] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 15.534] (II) No input driver specified, ignoring this device.
[ 15.534] (II) This device may have been added with another device file.
[ 19.501] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 19.501] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 19.501] (--) NVIDIA(GPU-0):
[ 19.531] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): connected
[ 19.531] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 19.531] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 19.531] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 19.531] (--) NVIDIA(GPU-0):
[ 19.531] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 19.531] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 19.531] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[ 19.531] (--) NVIDIA(GPU-0):
[ 19.531] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 19.531] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 19.531] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 19.531] (--) NVIDIA(GPU-0):
[ 19.531] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 19.531] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 19.531] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 19.531] (--) NVIDIA(GPU-0):
[ 19.531] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 19.531] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 19.531] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 19.531] (--) NVIDIA(GPU-0):
[ 24.015] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 24.015] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 24.015] (--) NVIDIA(GPU-0):
[ 24.045] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): connected
[ 24.045] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 24.045] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 24.045] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 24.045] (--) NVIDIA(GPU-0):
[ 24.045] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 24.045] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 24.045] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[ 24.045] (--) NVIDIA(GPU-0):
[ 24.045] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 24.045] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 24.045] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 24.045] (--) NVIDIA(GPU-0):
[ 24.045] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 24.045] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 24.045] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 24.045] (--) NVIDIA(GPU-0):
[ 24.045] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 24.045] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 24.045] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 24.045] (--) NVIDIA(GPU-0):
[ 62.782] (II) systemd-logind: got pause for 13:69
[ 62.782] (II) systemd-logind: got pause for 13:66
[ 62.782] (II) systemd-logind: got pause for 13:65
[ 62.782] (II) systemd-logind: got pause for 226:0
[ 62.782] (II) systemd-logind: got pause for 13:67
[ 62.782] (II) systemd-logind: got pause for 13:64
[ 62.782] (II) systemd-logind: got pause for 13:68
Put the fun back into computing.
Arch 64bit con Cinnamon/Xfce4.12 su ASUS X52JB (Intel Pentium P6100, 4Gb RAM e ATI Mobility Radeon HD 5145)
Arch 64bit con Cinnamon (Intel Core i5-4690K e Asus nVidia GTX-970 Strix Direct CU II OC)
Arch 64bit con Cinnamon/Xfce4.12 su ASUS X52JB (Intel Pentium P6100, 4Gb RAM e ATI Mobility Radeon HD 5145)
Arch 64bit con Cinnamon (Intel Core i5-4690K e Asus nVidia GTX-970 Strix Direct CU II OC)
Re: Impostare frequenza di aggiornamento verticale monitor
Dal log ora sembrerebbe a posto. Posta l'output di
Codice: Seleziona tutto
xrandr
Offertissima: Mi Vendo!!! Cercasi lavoro o corso di formazione finanziato in tutta italia da Roma in su, oppure in provincia di Catanzaro.
In particolare sono interessato ad opportunità su Roma.
In particolare sono interessato ad opportunità su Roma.
-
- Arciere
- Messaggi: 226
- Iscritto il: 11 febbraio 2015, 16:53
- Architettura: x86_64 (64bit)
Re: Impostare frequenza di aggiornamento verticale monitor
Codice: Seleziona tutto
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 16384 x 16384
DVI-I-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 531mm x 298mm
1920x1080 60.00*+ 144.00 119.98 99.93
1440x900 119.85
1280x1024 119.96 75.02 60.02
1024x768 119.99 75.03 60.00
800x600 119.97 75.00 60.32
640x480 120.01 75.00 59.94
HDMI-0 disconnected (normal left inverted right x axis y axis)
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
DVI-D-0 disconnected (normal left inverted right x axis y axis)
Put the fun back into computing.
Arch 64bit con Cinnamon/Xfce4.12 su ASUS X52JB (Intel Pentium P6100, 4Gb RAM e ATI Mobility Radeon HD 5145)
Arch 64bit con Cinnamon (Intel Core i5-4690K e Asus nVidia GTX-970 Strix Direct CU II OC)
Arch 64bit con Cinnamon/Xfce4.12 su ASUS X52JB (Intel Pentium P6100, 4Gb RAM e ATI Mobility Radeon HD 5145)
Arch 64bit con Cinnamon (Intel Core i5-4690K e Asus nVidia GTX-970 Strix Direct CU II OC)
Re: Impostare frequenza di aggiornamento verticale monitor
riavvia e riposta xrandr.
Offertissima: Mi Vendo!!! Cercasi lavoro o corso di formazione finanziato in tutta italia da Roma in su, oppure in provincia di Catanzaro.
In particolare sono interessato ad opportunità su Roma.
In particolare sono interessato ad opportunità su Roma.
-
- Arciere
- Messaggi: 226
- Iscritto il: 11 febbraio 2015, 16:53
- Architettura: x86_64 (64bit)
Re: Impostare frequenza di aggiornamento verticale monitor
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 16384 x 16384
DVI-I-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 531mm x 298mm
1920x1080 60.00 + 144.00 119.98* 99.93
1440x900 119.85
1280x1024 119.96 75.02 60.02
1024x768 119.99 75.03 60.00
800x600 119.97 75.00 60.32
640x480 120.01 75.00 59.94
HDMI-0 disconnected (normal left inverted right x axis y axis)
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
DVI-D-0 disconnected (normal left inverted right x axis y axis)
DVI-I-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 531mm x 298mm
1920x1080 60.00 + 144.00 119.98* 99.93
1440x900 119.85
1280x1024 119.96 75.02 60.02
1024x768 119.99 75.03 60.00
800x600 119.97 75.00 60.32
640x480 120.01 75.00 59.94
HDMI-0 disconnected (normal left inverted right x axis y axis)
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
DVI-D-0 disconnected (normal left inverted right x axis y axis)
Put the fun back into computing.
Arch 64bit con Cinnamon/Xfce4.12 su ASUS X52JB (Intel Pentium P6100, 4Gb RAM e ATI Mobility Radeon HD 5145)
Arch 64bit con Cinnamon (Intel Core i5-4690K e Asus nVidia GTX-970 Strix Direct CU II OC)
Arch 64bit con Cinnamon/Xfce4.12 su ASUS X52JB (Intel Pentium P6100, 4Gb RAM e ATI Mobility Radeon HD 5145)
Arch 64bit con Cinnamon (Intel Core i5-4690K e Asus nVidia GTX-970 Strix Direct CU II OC)
Re: Impostare frequenza di aggiornamento verticale monitor
riposta il log.
Offertissima: Mi Vendo!!! Cercasi lavoro o corso di formazione finanziato in tutta italia da Roma in su, oppure in provincia di Catanzaro.
In particolare sono interessato ad opportunità su Roma.
In particolare sono interessato ad opportunità su Roma.
-
- Arciere
- Messaggi: 226
- Iscritto il: 11 febbraio 2015, 16:53
- Architettura: x86_64 (64bit)
Re: Impostare frequenza di aggiornamento verticale monitor
Codice: Seleziona tutto
[ 13.678] (--) Log file renamed from "/var/log/Xorg.pid-550.log" to "/var/log/Xorg.0.log"
[ 13.710]
X.Org X Server 1.18.1
Release Date: 2016-02-08
[ 13.710] X Protocol Version 11, Revision 0
[ 13.710] Build Operating System: Linux 4.2.5-1-ARCH x86_64
[ 13.710] Current Operating System: Linux archcomputer 4.4.5-1-ARCH #1 SMP PREEMPT Thu Mar 10 07:38:19 CET 2016 x86_64
[ 13.710] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=00207c10-d846-4354-b73c-bbb3a3223dc7 rw
[ 13.710] Build Date: 11 February 2016 09:57:03AM
[ 13.710]
[ 13.710] Current version of pixman: 0.34.0
[ 13.710] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.710] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.710] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 20 20:52:02 2016
[ 13.746] (==) Using config file: "/etc/X11/xorg.conf"
[ 13.746] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 13.783] (==) ServerLayout "Layout0"
[ 13.783] (**) |-->Screen "Screen0" (0)
[ 13.783] (**) | |-->Monitor "Monitor0"
[ 13.783] (**) | |-->Device "Device0"
[ 13.783] (**) |-->Input Device "Keyboard0"
[ 13.783] (**) |-->Input Device "Mouse0"
[ 13.783] (**) Option "Xinerama" "0"
[ 13.783] (==) Automatically adding devices
[ 13.783] (==) Automatically enabling devices
[ 13.783] (==) Automatically adding GPU devices
[ 13.783] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 13.807] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 13.807] Entry deleted from font path.
[ 13.807] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 13.807] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 13.807] Entry deleted from font path.
[ 13.807] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 13.807] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 13.807] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.807] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 13.808] (WW) Disabling Keyboard0
[ 13.808] (WW) Disabling Mouse0
[ 13.808] (II) Loader magic: 0x81ad60
[ 13.808] (II) Module ABI versions:
[ 13.808] X.Org ANSI C Emulation: 0.4
[ 13.808] X.Org Video Driver: 20.0
[ 13.808] X.Org XInput driver : 22.1
[ 13.808] X.Org Server Extension : 9.0
[ 13.808] (++) using VT number 1
[ 13.809] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 13.809] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 13.809] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 9 paused 0
[ 13.810] (--) PCI:*(0:1:0:0) 10de:13c2:1043:8508 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 13.810] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 13.810] (II) LoadModule: "glx"
[ 13.849] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 14.208] (II) Module glx: vendor="NVIDIA Corporation"
[ 14.208] compiled for 4.0.2, module version = 1.0.0
[ 14.208] Module class: X.Org Server Extension
[ 14.219] (II) NVIDIA GLX Module 361.28 Wed Feb 3 15:10:57 PST 2016
[ 14.232] (II) LoadModule: "nvidia"
[ 14.252] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 14.278] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 14.278] compiled for 4.0.2, module version = 1.0.0
[ 14.278] Module class: X.Org Video Driver
[ 14.278] (II) NVIDIA dlloader X Driver 361.28 Wed Feb 3 14:48:10 PST 2016
[ 14.278] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 14.300] (II) Loading sub module "fb"
[ 14.300] (II) LoadModule: "fb"
[ 14.314] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 14.320] (II) Module fb: vendor="X.Org Foundation"
[ 14.320] compiled for 1.18.1, module version = 1.0.0
[ 14.320] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.320] (II) Loading sub module "wfb"
[ 14.320] (II) LoadModule: "wfb"
[ 14.320] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 14.321] (II) Module wfb: vendor="X.Org Foundation"
[ 14.321] compiled for 1.18.1, module version = 1.0.0
[ 14.321] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.321] (II) Loading sub module "ramdac"
[ 14.321] (II) LoadModule: "ramdac"
[ 14.321] (II) Module "ramdac" already built-in
[ 14.335] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 14.335] (==) NVIDIA(0): RGB weight 888
[ 14.335] (==) NVIDIA(0): Default visual is TrueColor
[ 14.335] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 14.336] (**) NVIDIA(0): Option "Stereo" "0"
[ 14.336] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP-0"
[ 14.336] (**) NVIDIA(0): Option "SLI" "Off"
[ 14.336] (**) NVIDIA(0): Option "MultiGPU" "Off"
[ 14.336] (**) NVIDIA(0): Option "BaseMosaic" "off"
[ 14.336] (**) NVIDIA(0): Stereo disabled by request
[ 14.336] (**) NVIDIA(0): NVIDIA SLI disabled.
[ 14.336] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[ 14.336] (**) NVIDIA(0): Option "MetaModes" "1920x1080_60 +0+0"
[ 14.336] (**) NVIDIA(0): Enabling 2D acceleration
[ 15.087] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 15.087] (--) NVIDIA(0): CRT-0
[ 15.087] (--) NVIDIA(0): DFP-0 (boot)
[ 15.087] (--) NVIDIA(0): DFP-1
[ 15.087] (--) NVIDIA(0): DFP-2
[ 15.087] (--) NVIDIA(0): DFP-3
[ 15.087] (--) NVIDIA(0): DFP-4
[ 15.117] (--) NVIDIA(0): CRT-0: disconnected
[ 15.117] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 15.117] (--) NVIDIA(0):
[ 15.177] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): connected
[ 15.177] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 15.177] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 15.177] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 15.177] (--) NVIDIA(0):
[ 15.177] (--) NVIDIA(0): DFP-1: disconnected
[ 15.177] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 15.177] (--) NVIDIA(0): DFP-1: 330.0 MHz maximum pixel clock
[ 15.177] (--) NVIDIA(0):
[ 15.177] (--) NVIDIA(0): DFP-2: disconnected
[ 15.177] (--) NVIDIA(0): DFP-2: Internal DisplayPort
[ 15.177] (--) NVIDIA(0): DFP-2: 960.0 MHz maximum pixel clock
[ 15.177] (--) NVIDIA(0):
[ 15.177] (--) NVIDIA(0): DFP-3: disconnected
[ 15.177] (--) NVIDIA(0): DFP-3: Internal TMDS
[ 15.177] (--) NVIDIA(0): DFP-3: 330.0 MHz maximum pixel clock
[ 15.177] (--) NVIDIA(0):
[ 15.177] (--) NVIDIA(0): DFP-4: disconnected
[ 15.177] (--) NVIDIA(0): DFP-4: Internal TMDS
[ 15.177] (--) NVIDIA(0): DFP-4: 330.0 MHz maximum pixel clock
[ 15.177] (--) NVIDIA(0):
[ 15.177] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 15.177] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 970 (GM204-A) at PCI:1:0:0 (GPU-0)
[ 15.177] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 15.177] (--) NVIDIA(0): VideoBIOS: 84.04.1f.00.2b
[ 15.177] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 15.177] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 15.177] (**) NVIDIA(0): device BenQ XL2411Z (DFP-0) (Using EDID frequencies has
[ 15.177] (**) NVIDIA(0): been enabled on all display devices.)
[ 15.179] (II) NVIDIA(0): Validated MetaModes:
[ 15.179] (II) NVIDIA(0): "1920x1080_60+0+0"
[ 15.179] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 15.192] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
[ 15.192] (--) NVIDIA(0): option
[ 15.192] (--) Depth 24 pixmap format is 32 bpp
[ 15.193] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 15.193] (II) NVIDIA: access.
[ 15.195] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 15.195] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 15.195] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 15.195] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 15.195] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 15.195] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 15.195] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 15.195] (II) NVIDIA(0): Config Options in the README.
[ 15.860] (II) NVIDIA(0): Setting mode "1920x1080_60+0+0"
[ 15.937] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 15.937] (==) NVIDIA(0): Backing store enabled
[ 15.937] (==) NVIDIA(0): Silken mouse enabled
[ 15.937] (**) NVIDIA(0): DPMS enabled
[ 15.938] (II) Loading sub module "x11glvnd"
[ 15.938] (II) LoadModule: "x11glvnd"
[ 15.938] (II) Loading /usr/lib/xorg/modules/extensions/x11glvnd.so
[ 15.946] (II) Module x11glvnd: vendor="X.Org Foundation"
[ 15.946] compiled for 4.0.2, module version = 1.0.0
[ 15.946] Module class: X.Org Server Extension
[ 15.946] (II) x11glvnd Loading
[ 15.946] (II) Loading sub module "dri2"
[ 15.946] (II) LoadModule: "dri2"
[ 15.946] (II) Module "dri2" already built-in
[ 15.946] (II) NVIDIA(0): [DRI2] Setup complete
[ 15.946] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 15.946] (--) RandR disabled
[ 15.948] (II) Initializing extension GLX
[ 15.948] (II) Indirect GLX disabled.
[ 16.261] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 16.261] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.261] (II) LoadModule: "evdev"
[ 16.261] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.290] (II) Module evdev: vendor="X.Org Foundation"
[ 16.290] compiled for 1.18.0, module version = 2.10.1
[ 16.290] Module class: X.Org XInput Driver
[ 16.290] ABI class: X.Org XInput driver, version 22.1
[ 16.291] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 30 paused 0
[ 16.291] (II) Using input driver 'evdev' for 'Power Button'
[ 16.291] (**) Power Button: always reports core events
[ 16.291] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 16.291] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.291] (--) evdev: Power Button: Found keys
[ 16.291] (II) evdev: Power Button: Configuring as keyboard
[ 16.291] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event5"
[ 16.291] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 16.291] (**) Option "xkb_rules" "evdev"
[ 16.291] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 16.291] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.291] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 31 paused 0
[ 16.291] (II) Using input driver 'evdev' for 'Power Button'
[ 16.291] (**) Power Button: always reports core events
[ 16.291] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 16.291] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.291] (--) evdev: Power Button: Found keys
[ 16.291] (II) evdev: Power Button: Configuring as keyboard
[ 16.291] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event3"
[ 16.291] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 16.291] (**) Option "xkb_rules" "evdev"
[ 16.292] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 16.292] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 16.292] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 32 paused 0
[ 16.292] (II) Using input driver 'evdev' for 'Sleep Button'
[ 16.292] (**) Sleep Button: always reports core events
[ 16.292] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 16.292] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 16.292] (--) evdev: Sleep Button: Found keys
[ 16.292] (II) evdev: Sleep Button: Configuring as keyboard
[ 16.292] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event4"
[ 16.292] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 16.292] (**) Option "xkb_rules" "evdev"
[ 16.292] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[ 16.292] (II) No input driver specified, ignoring this device.
[ 16.292] (II) This device may have been added with another device file.
[ 16.292] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
[ 16.292] (II) No input driver specified, ignoring this device.
[ 16.292] (II) This device may have been added with another device file.
[ 16.292] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event18)
[ 16.293] (II) No input driver specified, ignoring this device.
[ 16.293] (II) This device may have been added with another device file.
[ 16.293] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event19)
[ 16.293] (II) No input driver specified, ignoring this device.
[ 16.293] (II) This device may have been added with another device file.
[ 16.293] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event0)
[ 16.293] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 16.346] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 33 paused 0
[ 16.346] (II) Using input driver 'evdev' for 'USB OPTICAL MOUSE'
[ 16.346] (**) USB OPTICAL MOUSE: always reports core events
[ 16.346] (**) evdev: USB OPTICAL MOUSE: Device: "/dev/input/event0"
[ 16.346] (--) evdev: USB OPTICAL MOUSE: Vendor 0x93a Product 0x2521
[ 16.346] (--) evdev: USB OPTICAL MOUSE: Found 9 mouse buttons
[ 16.346] (--) evdev: USB OPTICAL MOUSE: Found scroll wheel(s)
[ 16.346] (--) evdev: USB OPTICAL MOUSE: Found relative axes
[ 16.346] (--) evdev: USB OPTICAL MOUSE: Found x and y relative axes
[ 16.346] (II) evdev: USB OPTICAL MOUSE: Configuring as mouse
[ 16.346] (II) evdev: USB OPTICAL MOUSE: Adding scrollwheel support
[ 16.346] (**) evdev: USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 16.346] (**) evdev: USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.346] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:093A:2521.0001/input/input2/event0"
[ 16.346] (II) XINPUT: Adding extended input device "USB OPTICAL MOUSE" (type: MOUSE, id 9)
[ 16.346] (II) evdev: USB OPTICAL MOUSE: initialized for relative axes.
[ 16.347] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 16.347] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 16.347] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 16.347] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 16.347] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 16.347] (II) No input driver specified, ignoring this device.
[ 16.347] (II) This device may have been added with another device file.
[ 16.347] (II) config/udev: Adding input device SINO WEALTH USB KEYBOARD (/dev/input/event1)
[ 16.347] (**) SINO WEALTH USB KEYBOARD: Applying InputClass "evdev keyboard catchall"
[ 16.347] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 34 paused 0
[ 16.347] (II) Using input driver 'evdev' for 'SINO WEALTH USB KEYBOARD'
[ 16.347] (**) SINO WEALTH USB KEYBOARD: always reports core events
[ 16.347] (**) evdev: SINO WEALTH USB KEYBOARD: Device: "/dev/input/event1"
[ 16.347] (--) evdev: SINO WEALTH USB KEYBOARD: Vendor 0x258a Product 0x1
[ 16.347] (--) evdev: SINO WEALTH USB KEYBOARD: Found keys
[ 16.347] (II) evdev: SINO WEALTH USB KEYBOARD: Configuring as keyboard
[ 16.347] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:258A:0001.0002/input/input3/event1"
[ 16.347] (II) XINPUT: Adding extended input device "SINO WEALTH USB KEYBOARD" (type: KEYBOARD, id 10)
[ 16.347] (**) Option "xkb_rules" "evdev"
[ 16.348] (II) config/udev: Adding input device SINO WEALTH USB KEYBOARD (/dev/input/event2)
[ 16.348] (**) SINO WEALTH USB KEYBOARD: Applying InputClass "evdev keyboard catchall"
[ 16.348] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 35 paused 0
[ 16.348] (II) Using input driver 'evdev' for 'SINO WEALTH USB KEYBOARD'
[ 16.348] (**) SINO WEALTH USB KEYBOARD: always reports core events
[ 16.348] (**) evdev: SINO WEALTH USB KEYBOARD: Device: "/dev/input/event2"
[ 16.348] (--) evdev: SINO WEALTH USB KEYBOARD: Vendor 0x258a Product 0x1
[ 16.348] (--) evdev: SINO WEALTH USB KEYBOARD: Found keys
[ 16.348] (II) evdev: SINO WEALTH USB KEYBOARD: Configuring as keyboard
[ 16.348] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:258A:0001.0003/input/input4/event2"
[ 16.348] (II) XINPUT: Adding extended input device "SINO WEALTH USB KEYBOARD" (type: KEYBOARD, id 11)
[ 16.348] (**) Option "xkb_rules" "evdev"
[ 16.348] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/event20)
[ 16.348] (II) No input driver specified, ignoring this device.
[ 16.348] (II) This device may have been added with another device file.
[ 16.349] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/js0)
[ 16.349] (II) No input driver specified, ignoring this device.
[ 16.349] (II) This device may have been added with another device file.
[ 16.349] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/event21)
[ 16.349] (II) No input driver specified, ignoring this device.
[ 16.349] (II) This device may have been added with another device file.
[ 16.349] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/js1)
[ 16.349] (II) No input driver specified, ignoring this device.
[ 16.349] (II) This device may have been added with another device file.
[ 16.349] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/event22)
[ 16.349] (II) No input driver specified, ignoring this device.
[ 16.349] (II) This device may have been added with another device file.
[ 16.349] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/js2)
[ 16.349] (II) No input driver specified, ignoring this device.
[ 16.349] (II) This device may have been added with another device file.
[ 16.350] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/event23)
[ 16.350] (II) No input driver specified, ignoring this device.
[ 16.350] (II) This device may have been added with another device file.
[ 16.350] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/js3)
[ 16.350] (II) No input driver specified, ignoring this device.
[ 16.350] (II) This device may have been added with another device file.
[ 16.350] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event8)
[ 16.350] (II) No input driver specified, ignoring this device.
[ 16.350] (II) This device may have been added with another device file.
[ 16.350] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event9)
[ 16.350] (II) No input driver specified, ignoring this device.
[ 16.350] (II) This device may have been added with another device file.
[ 16.350] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event10)
[ 16.350] (II) No input driver specified, ignoring this device.
[ 16.350] (II) This device may have been added with another device file.
[ 16.350] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event11)
[ 16.350] (II) No input driver specified, ignoring this device.
[ 16.350] (II) This device may have been added with another device file.
[ 16.350] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event12)
[ 16.350] (II) No input driver specified, ignoring this device.
[ 16.350] (II) This device may have been added with another device file.
[ 16.350] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event13)
[ 16.350] (II) No input driver specified, ignoring this device.
[ 16.350] (II) This device may have been added with another device file.
[ 16.351] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event14)
[ 16.351] (II) No input driver specified, ignoring this device.
[ 16.351] (II) This device may have been added with another device file.
[ 16.351] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event15)
[ 16.351] (II) No input driver specified, ignoring this device.
[ 16.351] (II) This device may have been added with another device file.
[ 16.351] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 16.351] (II) No input driver specified, ignoring this device.
[ 16.351] (II) This device may have been added with another device file.
[ 16.351] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 16.351] (II) No input driver specified, ignoring this device.
[ 16.351] (II) This device may have been added with another device file.
[ 16.412] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): connected
[ 16.412] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 16.412] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 16.412] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 16.412] (--) NVIDIA(GPU-0):
[ 16.472] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): connected
[ 16.472] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 16.472] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 16.472] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 16.472] (--) NVIDIA(GPU-0):
[ 20.167] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 20.167] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 20.167] (--) NVIDIA(GPU-0):
[ 20.227] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): connected
[ 20.227] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 20.227] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 20.227] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 20.227] (--) NVIDIA(GPU-0):
[ 20.227] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 20.227] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 20.227] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[ 20.227] (--) NVIDIA(GPU-0):
[ 20.227] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 20.227] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 20.227] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 20.227] (--) NVIDIA(GPU-0):
[ 20.227] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 20.227] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 20.227] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 20.227] (--) NVIDIA(GPU-0):
[ 20.227] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 20.227] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 20.227] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 20.227] (--) NVIDIA(GPU-0):
[ 24.629] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 24.629] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 24.629] (--) NVIDIA(GPU-0):
[ 24.688] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): connected
[ 24.688] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 24.688] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 24.688] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 24.688] (--) NVIDIA(GPU-0):
[ 24.688] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 24.688] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 24.688] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[ 24.688] (--) NVIDIA(GPU-0):
[ 24.689] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 24.689] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 24.689] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 24.689] (--) NVIDIA(GPU-0):
[ 24.689] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 24.689] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 24.689] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 24.689] (--) NVIDIA(GPU-0):
[ 24.689] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 24.689] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 24.689] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 24.689] (--) NVIDIA(GPU-0):
[ 35.953] (II) systemd-logind: got pause for 13:69
[ 35.953] (II) systemd-logind: got pause for 226:0
[ 35.953] (II) systemd-logind: got pause for 13:68
[ 35.953] (II) systemd-logind: got pause for 13:64
[ 35.953] (II) systemd-logind: got pause for 13:66
[ 35.953] (II) systemd-logind: got pause for 13:65
[ 35.953] (II) systemd-logind: got pause for 13:67
Put the fun back into computing.
Arch 64bit con Cinnamon/Xfce4.12 su ASUS X52JB (Intel Pentium P6100, 4Gb RAM e ATI Mobility Radeon HD 5145)
Arch 64bit con Cinnamon (Intel Core i5-4690K e Asus nVidia GTX-970 Strix Direct CU II OC)
Arch 64bit con Cinnamon/Xfce4.12 su ASUS X52JB (Intel Pentium P6100, 4Gb RAM e ATI Mobility Radeon HD 5145)
Arch 64bit con Cinnamon (Intel Core i5-4690K e Asus nVidia GTX-970 Strix Direct CU II OC)
Re: Impostare frequenza di aggiornamento verticale monitor
Sicuro che sia completo? Perchè secondo xrandr, nonostante i 60 Hz risultino la modalità preferita, attualmente il refresh è impostato a 120. Ma nel log di Xorg non c'è traccia di questo.
Offertissima: Mi Vendo!!! Cercasi lavoro o corso di formazione finanziato in tutta italia da Roma in su, oppure in provincia di Catanzaro.
In particolare sono interessato ad opportunità su Roma.
In particolare sono interessato ad opportunità su Roma.
-
- Arciere
- Messaggi: 226
- Iscritto il: 11 febbraio 2015, 16:53
- Architettura: x86_64 (64bit)
Re: Impostare frequenza di aggiornamento verticale monitor
Nel dubbio lo riposto
Codice: Seleziona tutto
[ 13.300] (--) Log file renamed from "/var/log/Xorg.pid-555.log" to "/var/log/Xorg.0.log"
[ 13.342]
X.Org X Server 1.18.1
Release Date: 2016-02-08
[ 13.342] X Protocol Version 11, Revision 0
[ 13.342] Build Operating System: Linux 4.2.5-1-ARCH x86_64
[ 13.342] Current Operating System: Linux archcomputer 4.4.5-1-ARCH #1 SMP PREEMPT Thu Mar 10 07:38:19 CET 2016 x86_64
[ 13.342] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=00207c10-d846-4354-b73c-bbb3a3223dc7 rw
[ 13.342] Build Date: 11 February 2016 09:57:03AM
[ 13.342]
[ 13.342] Current version of pixman: 0.34.0
[ 13.342] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.342] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.342] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 21 12:37:22 2016
[ 13.384] (==) Using config file: "/etc/X11/xorg.conf"
[ 13.384] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 13.440] (==) ServerLayout "Layout0"
[ 13.440] (**) |-->Screen "Screen0" (0)
[ 13.440] (**) | |-->Monitor "Monitor0"
[ 13.440] (**) | |-->Device "Device0"
[ 13.440] (**) |-->Input Device "Keyboard0"
[ 13.440] (**) |-->Input Device "Mouse0"
[ 13.440] (**) Option "Xinerama" "0"
[ 13.440] (==) Automatically adding devices
[ 13.440] (==) Automatically enabling devices
[ 13.440] (==) Automatically adding GPU devices
[ 13.440] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 13.463] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 13.463] Entry deleted from font path.
[ 13.463] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 13.463] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 13.463] Entry deleted from font path.
[ 13.463] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 13.463] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 13.463] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.463] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 13.463] (WW) Disabling Keyboard0
[ 13.463] (WW) Disabling Mouse0
[ 13.463] (II) Loader magic: 0x81ad60
[ 13.463] (II) Module ABI versions:
[ 13.463] X.Org ANSI C Emulation: 0.4
[ 13.463] X.Org Video Driver: 20.0
[ 13.463] X.Org XInput driver : 22.1
[ 13.463] X.Org Server Extension : 9.0
[ 13.463] (++) using VT number 1
[ 13.464] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 13.464] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 13.464] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 9 paused 0
[ 13.465] (--) PCI:*(0:1:0:0) 10de:13c2:1043:8508 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 13.465] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 13.465] (II) LoadModule: "glx"
[ 13.513] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13.830] (II) Module glx: vendor="NVIDIA Corporation"
[ 13.830] compiled for 4.0.2, module version = 1.0.0
[ 13.830] Module class: X.Org Server Extension
[ 13.832] (II) NVIDIA GLX Module 361.28 Wed Feb 3 15:10:57 PST 2016
[ 13.846] (II) LoadModule: "nvidia"
[ 13.857] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 13.891] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 13.891] compiled for 4.0.2, module version = 1.0.0
[ 13.891] Module class: X.Org Video Driver
[ 13.896] (II) NVIDIA dlloader X Driver 361.28 Wed Feb 3 14:48:10 PST 2016
[ 13.896] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 13.905] (II) Loading sub module "fb"
[ 13.905] (II) LoadModule: "fb"
[ 13.928] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 13.934] (II) Module fb: vendor="X.Org Foundation"
[ 13.934] compiled for 1.18.1, module version = 1.0.0
[ 13.934] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.934] (II) Loading sub module "wfb"
[ 13.934] (II) LoadModule: "wfb"
[ 13.934] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 13.935] (II) Module wfb: vendor="X.Org Foundation"
[ 13.935] compiled for 1.18.1, module version = 1.0.0
[ 13.935] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.935] (II) Loading sub module "ramdac"
[ 13.935] (II) LoadModule: "ramdac"
[ 13.935] (II) Module "ramdac" already built-in
[ 13.936] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 13.936] (==) NVIDIA(0): RGB weight 888
[ 13.936] (==) NVIDIA(0): Default visual is TrueColor
[ 13.936] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 13.937] (**) NVIDIA(0): Option "Stereo" "0"
[ 13.937] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP-0"
[ 13.937] (**) NVIDIA(0): Option "SLI" "Off"
[ 13.937] (**) NVIDIA(0): Option "MultiGPU" "Off"
[ 13.937] (**) NVIDIA(0): Option "BaseMosaic" "off"
[ 13.937] (**) NVIDIA(0): Stereo disabled by request
[ 13.937] (**) NVIDIA(0): NVIDIA SLI disabled.
[ 13.937] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[ 13.937] (**) NVIDIA(0): Option "MetaModes" "1920x1080_60 +0+0"
[ 13.937] (**) NVIDIA(0): Enabling 2D acceleration
[ 14.641] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 14.641] (--) NVIDIA(0): CRT-0
[ 14.641] (--) NVIDIA(0): DFP-0 (boot)
[ 14.641] (--) NVIDIA(0): DFP-1
[ 14.641] (--) NVIDIA(0): DFP-2
[ 14.641] (--) NVIDIA(0): DFP-3
[ 14.641] (--) NVIDIA(0): DFP-4
[ 14.671] (--) NVIDIA(0): CRT-0: disconnected
[ 14.671] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 14.671] (--) NVIDIA(0):
[ 14.731] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): connected
[ 14.731] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 14.731] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 14.731] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 14.731] (--) NVIDIA(0):
[ 14.731] (--) NVIDIA(0): DFP-1: disconnected
[ 14.731] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 14.731] (--) NVIDIA(0): DFP-1: 330.0 MHz maximum pixel clock
[ 14.731] (--) NVIDIA(0):
[ 14.731] (--) NVIDIA(0): DFP-2: disconnected
[ 14.731] (--) NVIDIA(0): DFP-2: Internal DisplayPort
[ 14.731] (--) NVIDIA(0): DFP-2: 960.0 MHz maximum pixel clock
[ 14.731] (--) NVIDIA(0):
[ 14.731] (--) NVIDIA(0): DFP-3: disconnected
[ 14.731] (--) NVIDIA(0): DFP-3: Internal TMDS
[ 14.731] (--) NVIDIA(0): DFP-3: 330.0 MHz maximum pixel clock
[ 14.731] (--) NVIDIA(0):
[ 14.731] (--) NVIDIA(0): DFP-4: disconnected
[ 14.731] (--) NVIDIA(0): DFP-4: Internal TMDS
[ 14.731] (--) NVIDIA(0): DFP-4: 330.0 MHz maximum pixel clock
[ 14.731] (--) NVIDIA(0):
[ 14.731] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 14.732] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 970 (GM204-A) at PCI:1:0:0 (GPU-0)
[ 14.732] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 14.732] (--) NVIDIA(0): VideoBIOS: 84.04.1f.00.2b
[ 14.732] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 14.732] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 14.732] (**) NVIDIA(0): device BenQ XL2411Z (DFP-0) (Using EDID frequencies has
[ 14.732] (**) NVIDIA(0): been enabled on all display devices.)
[ 14.733] (II) NVIDIA(0): Validated MetaModes:
[ 14.733] (II) NVIDIA(0): "1920x1080_60+0+0"
[ 14.733] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 14.747] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
[ 14.747] (--) NVIDIA(0): option
[ 14.747] (--) Depth 24 pixmap format is 32 bpp
[ 14.748] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 14.748] (II) NVIDIA: access.
[ 14.750] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 14.750] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 14.750] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 14.750] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 14.750] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 14.750] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 14.750] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 14.750] (II) NVIDIA(0): Config Options in the README.
[ 15.379] (II) NVIDIA(0): Setting mode "1920x1080_60+0+0"
[ 15.475] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 15.476] (==) NVIDIA(0): Backing store enabled
[ 15.476] (==) NVIDIA(0): Silken mouse enabled
[ 15.476] (**) NVIDIA(0): DPMS enabled
[ 15.476] (II) Loading sub module "x11glvnd"
[ 15.476] (II) LoadModule: "x11glvnd"
[ 15.476] (II) Loading /usr/lib/xorg/modules/extensions/x11glvnd.so
[ 15.484] (II) Module x11glvnd: vendor="X.Org Foundation"
[ 15.484] compiled for 4.0.2, module version = 1.0.0
[ 15.484] Module class: X.Org Server Extension
[ 15.484] (II) x11glvnd Loading
[ 15.484] (II) Loading sub module "dri2"
[ 15.484] (II) LoadModule: "dri2"
[ 15.484] (II) Module "dri2" already built-in
[ 15.484] (II) NVIDIA(0): [DRI2] Setup complete
[ 15.484] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 15.484] (--) RandR disabled
[ 15.487] (II) Initializing extension GLX
[ 15.487] (II) Indirect GLX disabled.
[ 15.792] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 15.792] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 15.792] (II) LoadModule: "evdev"
[ 15.792] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 15.821] (II) Module evdev: vendor="X.Org Foundation"
[ 15.821] compiled for 1.18.0, module version = 2.10.1
[ 15.821] Module class: X.Org XInput Driver
[ 15.821] ABI class: X.Org XInput driver, version 22.1
[ 15.821] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 30 paused 0
[ 15.821] (II) Using input driver 'evdev' for 'Power Button'
[ 15.821] (**) Power Button: always reports core events
[ 15.821] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 15.821] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 15.821] (--) evdev: Power Button: Found keys
[ 15.821] (II) evdev: Power Button: Configuring as keyboard
[ 15.821] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event5"
[ 15.821] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 15.821] (**) Option "xkb_rules" "evdev"
[ 15.821] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 15.821] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 15.822] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 31 paused 0
[ 15.822] (II) Using input driver 'evdev' for 'Power Button'
[ 15.822] (**) Power Button: always reports core events
[ 15.822] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 15.822] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 15.822] (--) evdev: Power Button: Found keys
[ 15.822] (II) evdev: Power Button: Configuring as keyboard
[ 15.822] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event3"
[ 15.822] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 15.822] (**) Option "xkb_rules" "evdev"
[ 15.822] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 15.822] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 15.822] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 32 paused 0
[ 15.822] (II) Using input driver 'evdev' for 'Sleep Button'
[ 15.822] (**) Sleep Button: always reports core events
[ 15.822] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 15.822] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 15.822] (--) evdev: Sleep Button: Found keys
[ 15.822] (II) evdev: Sleep Button: Configuring as keyboard
[ 15.822] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event4"
[ 15.822] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 15.822] (**) Option "xkb_rules" "evdev"
[ 15.823] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[ 15.823] (II) No input driver specified, ignoring this device.
[ 15.823] (II) This device may have been added with another device file.
[ 15.823] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
[ 15.823] (II) No input driver specified, ignoring this device.
[ 15.823] (II) This device may have been added with another device file.
[ 15.823] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event18)
[ 15.823] (II) No input driver specified, ignoring this device.
[ 15.823] (II) This device may have been added with another device file.
[ 15.823] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event19)
[ 15.823] (II) No input driver specified, ignoring this device.
[ 15.823] (II) This device may have been added with another device file.
[ 15.823] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event0)
[ 15.823] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 15.876] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 33 paused 0
[ 15.876] (II) Using input driver 'evdev' for 'USB OPTICAL MOUSE'
[ 15.876] (**) USB OPTICAL MOUSE: always reports core events
[ 15.876] (**) evdev: USB OPTICAL MOUSE: Device: "/dev/input/event0"
[ 15.876] (--) evdev: USB OPTICAL MOUSE: Vendor 0x93a Product 0x2521
[ 15.876] (--) evdev: USB OPTICAL MOUSE: Found 9 mouse buttons
[ 15.876] (--) evdev: USB OPTICAL MOUSE: Found scroll wheel(s)
[ 15.876] (--) evdev: USB OPTICAL MOUSE: Found relative axes
[ 15.876] (--) evdev: USB OPTICAL MOUSE: Found x and y relative axes
[ 15.876] (II) evdev: USB OPTICAL MOUSE: Configuring as mouse
[ 15.876] (II) evdev: USB OPTICAL MOUSE: Adding scrollwheel support
[ 15.876] (**) evdev: USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 15.876] (**) evdev: USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 15.876] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:093A:2521.0001/input/input2/event0"
[ 15.876] (II) XINPUT: Adding extended input device "USB OPTICAL MOUSE" (type: MOUSE, id 9)
[ 15.876] (II) evdev: USB OPTICAL MOUSE: initialized for relative axes.
[ 15.877] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 15.877] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 15.877] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 15.877] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 15.877] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 15.877] (II) No input driver specified, ignoring this device.
[ 15.877] (II) This device may have been added with another device file.
[ 15.877] (II) config/udev: Adding input device SINO WEALTH USB KEYBOARD (/dev/input/event1)
[ 15.877] (**) SINO WEALTH USB KEYBOARD: Applying InputClass "evdev keyboard catchall"
[ 15.877] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 34 paused 0
[ 15.877] (II) Using input driver 'evdev' for 'SINO WEALTH USB KEYBOARD'
[ 15.877] (**) SINO WEALTH USB KEYBOARD: always reports core events
[ 15.877] (**) evdev: SINO WEALTH USB KEYBOARD: Device: "/dev/input/event1"
[ 15.877] (--) evdev: SINO WEALTH USB KEYBOARD: Vendor 0x258a Product 0x1
[ 15.877] (--) evdev: SINO WEALTH USB KEYBOARD: Found keys
[ 15.877] (II) evdev: SINO WEALTH USB KEYBOARD: Configuring as keyboard
[ 15.877] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:258A:0001.0002/input/input3/event1"
[ 15.877] (II) XINPUT: Adding extended input device "SINO WEALTH USB KEYBOARD" (type: KEYBOARD, id 10)
[ 15.877] (**) Option "xkb_rules" "evdev"
[ 15.878] (II) config/udev: Adding input device SINO WEALTH USB KEYBOARD (/dev/input/event2)
[ 15.878] (**) SINO WEALTH USB KEYBOARD: Applying InputClass "evdev keyboard catchall"
[ 15.878] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 35 paused 0
[ 15.878] (II) Using input driver 'evdev' for 'SINO WEALTH USB KEYBOARD'
[ 15.878] (**) SINO WEALTH USB KEYBOARD: always reports core events
[ 15.878] (**) evdev: SINO WEALTH USB KEYBOARD: Device: "/dev/input/event2"
[ 15.878] (--) evdev: SINO WEALTH USB KEYBOARD: Vendor 0x258a Product 0x1
[ 15.878] (--) evdev: SINO WEALTH USB KEYBOARD: Found keys
[ 15.878] (II) evdev: SINO WEALTH USB KEYBOARD: Configuring as keyboard
[ 15.878] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:258A:0001.0003/input/input4/event2"
[ 15.878] (II) XINPUT: Adding extended input device "SINO WEALTH USB KEYBOARD" (type: KEYBOARD, id 11)
[ 15.878] (**) Option "xkb_rules" "evdev"
[ 15.878] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/event20)
[ 15.878] (II) No input driver specified, ignoring this device.
[ 15.878] (II) This device may have been added with another device file.
[ 15.878] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/js0)
[ 15.878] (II) No input driver specified, ignoring this device.
[ 15.878] (II) This device may have been added with another device file.
[ 15.879] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/event21)
[ 15.879] (II) No input driver specified, ignoring this device.
[ 15.879] (II) This device may have been added with another device file.
[ 15.879] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/js1)
[ 15.879] (II) No input driver specified, ignoring this device.
[ 15.879] (II) This device may have been added with another device file.
[ 15.879] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/event22)
[ 15.879] (II) No input driver specified, ignoring this device.
[ 15.879] (II) This device may have been added with another device file.
[ 15.879] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/js2)
[ 15.879] (II) No input driver specified, ignoring this device.
[ 15.879] (II) This device may have been added with another device file.
[ 15.879] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/event23)
[ 15.879] (II) No input driver specified, ignoring this device.
[ 15.879] (II) This device may have been added with another device file.
[ 15.880] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/js3)
[ 15.880] (II) No input driver specified, ignoring this device.
[ 15.880] (II) This device may have been added with another device file.
[ 15.880] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event8)
[ 15.880] (II) No input driver specified, ignoring this device.
[ 15.880] (II) This device may have been added with another device file.
[ 15.880] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event9)
[ 15.880] (II) No input driver specified, ignoring this device.
[ 15.880] (II) This device may have been added with another device file.
[ 15.880] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event10)
[ 15.880] (II) No input driver specified, ignoring this device.
[ 15.880] (II) This device may have been added with another device file.
[ 15.880] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event11)
[ 15.880] (II) No input driver specified, ignoring this device.
[ 15.880] (II) This device may have been added with another device file.
[ 15.880] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event12)
[ 15.880] (II) No input driver specified, ignoring this device.
[ 15.880] (II) This device may have been added with another device file.
[ 15.880] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event13)
[ 15.880] (II) No input driver specified, ignoring this device.
[ 15.880] (II) This device may have been added with another device file.
[ 15.880] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event14)
[ 15.880] (II) No input driver specified, ignoring this device.
[ 15.880] (II) This device may have been added with another device file.
[ 15.880] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 15.881] (II) No input driver specified, ignoring this device.
[ 15.881] (II) This device may have been added with another device file.
[ 15.881] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event7)
[ 15.881] (II) No input driver specified, ignoring this device.
[ 15.881] (II) This device may have been added with another device file.
[ 15.881] (II) config/udev: Adding input device PC Speaker (/dev/input/event15)
[ 15.881] (II) No input driver specified, ignoring this device.
[ 15.881] (II) This device may have been added with another device file.
[ 15.941] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): connected
[ 15.941] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 15.941] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 15.941] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 15.941] (--) NVIDIA(GPU-0):
[ 16.002] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): connected
[ 16.002] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 16.002] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 16.002] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 16.002] (--) NVIDIA(GPU-0):
[ 19.688] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 19.688] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 19.688] (--) NVIDIA(GPU-0):
[ 19.748] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): connected
[ 19.748] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 19.748] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 19.748] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 19.748] (--) NVIDIA(GPU-0):
[ 19.748] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 19.748] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 19.748] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[ 19.748] (--) NVIDIA(GPU-0):
[ 19.748] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 19.748] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 19.748] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 19.748] (--) NVIDIA(GPU-0):
[ 19.748] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 19.748] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 19.748] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 19.748] (--) NVIDIA(GPU-0):
[ 19.748] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 19.748] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 19.748] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 19.748] (--) NVIDIA(GPU-0):
[ 24.075] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 24.075] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 24.075] (--) NVIDIA(GPU-0):
[ 24.135] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): connected
[ 24.135] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 24.135] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 24.135] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 24.135] (--) NVIDIA(GPU-0):
[ 24.135] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 24.135] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 24.135] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[ 24.135] (--) NVIDIA(GPU-0):
[ 24.135] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 24.135] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 24.135] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 24.135] (--) NVIDIA(GPU-0):
[ 24.135] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 24.135] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 24.135] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 24.135] (--) NVIDIA(GPU-0):
[ 24.135] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 24.135] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 24.135] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 24.135] (--) NVIDIA(GPU-0):
[ 1170.343] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): connected
[ 1170.343] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 1170.343] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 1170.343] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 1170.343] (--) NVIDIA(GPU-0):
[ 1170.409] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): connected
[ 1170.409] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 1170.409] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 1170.409] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 1170.409] (--) NVIDIA(GPU-0):
[ 1184.675] (II) systemd-logind: got pause for 13:68
[ 1184.675] (II) systemd-logind: got pause for 13:66
[ 1184.675] (II) systemd-logind: got pause for 13:67
[ 1184.675] (II) systemd-logind: got pause for 13:69
[ 1184.675] (II) systemd-logind: got pause for 226:0
[ 1184.675] (II) systemd-logind: got pause for 13:64
[ 1184.675] (II) systemd-logind: got pause for 13:65
Put the fun back into computing.
Arch 64bit con Cinnamon/Xfce4.12 su ASUS X52JB (Intel Pentium P6100, 4Gb RAM e ATI Mobility Radeon HD 5145)
Arch 64bit con Cinnamon (Intel Core i5-4690K e Asus nVidia GTX-970 Strix Direct CU II OC)
Arch 64bit con Cinnamon/Xfce4.12 su ASUS X52JB (Intel Pentium P6100, 4Gb RAM e ATI Mobility Radeon HD 5145)
Arch 64bit con Cinnamon (Intel Core i5-4690K e Asus nVidia GTX-970 Strix Direct CU II OC)
Re: Impostare frequenza di aggiornamento verticale monitor
ok, però posta anche xrandr. Se dal momento in cui hai postato l'ultimo log non hai riavviato il server X, puoi anche non postare nuovamente il log.
Offertissima: Mi Vendo!!! Cercasi lavoro o corso di formazione finanziato in tutta italia da Roma in su, oppure in provincia di Catanzaro.
In particolare sono interessato ad opportunità su Roma.
In particolare sono interessato ad opportunità su Roma.
-
- Arciere
- Messaggi: 226
- Iscritto il: 11 febbraio 2015, 16:53
- Architettura: x86_64 (64bit)
Re: Impostare frequenza di aggiornamento verticale monitor
Facciamo che posto tutte e due freschi di avvio:
Codice: Seleziona tutto
[ 13.657] (--) Log file renamed from "/var/log/Xorg.pid-547.log" to "/var/log/Xorg.0.log"
[ 13.707]
X.Org X Server 1.18.1
Release Date: 2016-02-08
[ 13.707] X Protocol Version 11, Revision 0
[ 13.707] Build Operating System: Linux 4.2.5-1-ARCH x86_64
[ 13.707] Current Operating System: Linux archcomputer 4.4.5-1-ARCH #1 SMP PREEMPT Thu Mar 10 07:38:19 CET 2016 x86_64
[ 13.707] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=00207c10-d846-4354-b73c-bbb3a3223dc7 rw
[ 13.707] Build Date: 11 February 2016 09:57:03AM
[ 13.707]
[ 13.707] Current version of pixman: 0.34.0
[ 13.707] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.707] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.707] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 22 23:50:14 2016
[ 13.730] (==) Using config file: "/etc/X11/xorg.conf"
[ 13.730] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 13.756] (==) ServerLayout "Layout0"
[ 13.756] (**) |-->Screen "Screen0" (0)
[ 13.756] (**) | |-->Monitor "Monitor0"
[ 13.756] (**) | |-->Device "Device0"
[ 13.756] (**) |-->Input Device "Keyboard0"
[ 13.756] (**) |-->Input Device "Mouse0"
[ 13.756] (**) Option "Xinerama" "0"
[ 13.756] (==) Automatically adding devices
[ 13.756] (==) Automatically enabling devices
[ 13.756] (==) Automatically adding GPU devices
[ 13.756] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 13.779] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 13.779] Entry deleted from font path.
[ 13.779] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 13.779] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 13.779] Entry deleted from font path.
[ 13.779] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 13.779] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 13.779] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.779] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 13.779] (WW) Disabling Keyboard0
[ 13.779] (WW) Disabling Mouse0
[ 13.779] (II) Loader magic: 0x81ad60
[ 13.779] (II) Module ABI versions:
[ 13.779] X.Org ANSI C Emulation: 0.4
[ 13.779] X.Org Video Driver: 20.0
[ 13.779] X.Org XInput driver : 22.1
[ 13.779] X.Org Server Extension : 9.0
[ 13.780] (++) using VT number 1
[ 13.781] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 13.781] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 13.781] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 9 paused 0
[ 13.781] (--) PCI:*(0:1:0:0) 10de:13c2:1043:8508 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 13.782] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 13.782] (II) LoadModule: "glx"
[ 13.821] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 14.188] (II) Module glx: vendor="NVIDIA Corporation"
[ 14.188] compiled for 4.0.2, module version = 1.0.0
[ 14.188] Module class: X.Org Server Extension
[ 14.190] (II) NVIDIA GLX Module 361.28 Wed Feb 3 15:10:57 PST 2016
[ 14.203] (II) LoadModule: "nvidia"
[ 14.224] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 14.258] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 14.258] compiled for 4.0.2, module version = 1.0.0
[ 14.258] Module class: X.Org Video Driver
[ 14.262] (II) NVIDIA dlloader X Driver 361.28 Wed Feb 3 14:48:10 PST 2016
[ 14.262] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 14.272] (II) Loading sub module "fb"
[ 14.272] (II) LoadModule: "fb"
[ 14.294] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 14.300] (II) Module fb: vendor="X.Org Foundation"
[ 14.300] compiled for 1.18.1, module version = 1.0.0
[ 14.300] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.300] (II) Loading sub module "wfb"
[ 14.300] (II) LoadModule: "wfb"
[ 14.300] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 14.301] (II) Module wfb: vendor="X.Org Foundation"
[ 14.301] compiled for 1.18.1, module version = 1.0.0
[ 14.301] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.301] (II) Loading sub module "ramdac"
[ 14.301] (II) LoadModule: "ramdac"
[ 14.301] (II) Module "ramdac" already built-in
[ 14.315] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 14.315] (==) NVIDIA(0): RGB weight 888
[ 14.315] (==) NVIDIA(0): Default visual is TrueColor
[ 14.315] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 14.316] (**) NVIDIA(0): Option "Stereo" "0"
[ 14.316] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP-0"
[ 14.316] (**) NVIDIA(0): Option "SLI" "Off"
[ 14.316] (**) NVIDIA(0): Option "MultiGPU" "Off"
[ 14.316] (**) NVIDIA(0): Option "BaseMosaic" "off"
[ 14.316] (**) NVIDIA(0): Stereo disabled by request
[ 14.316] (**) NVIDIA(0): NVIDIA SLI disabled.
[ 14.316] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[ 14.316] (**) NVIDIA(0): Option "MetaModes" "1920x1080_60 +0+0"
[ 14.316] (**) NVIDIA(0): Enabling 2D acceleration
[ 15.100] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 15.100] (--) NVIDIA(0): CRT-0
[ 15.100] (--) NVIDIA(0): DFP-0 (boot)
[ 15.100] (--) NVIDIA(0): DFP-1
[ 15.100] (--) NVIDIA(0): DFP-2
[ 15.100] (--) NVIDIA(0): DFP-3
[ 15.100] (--) NVIDIA(0): DFP-4
[ 15.130] (--) NVIDIA(0): CRT-0: disconnected
[ 15.130] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 15.130] (--) NVIDIA(0):
[ 15.189] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): connected
[ 15.189] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 15.189] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 15.189] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 15.189] (--) NVIDIA(0):
[ 15.189] (--) NVIDIA(0): DFP-1: disconnected
[ 15.189] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 15.189] (--) NVIDIA(0): DFP-1: 330.0 MHz maximum pixel clock
[ 15.189] (--) NVIDIA(0):
[ 15.190] (--) NVIDIA(0): DFP-2: disconnected
[ 15.190] (--) NVIDIA(0): DFP-2: Internal DisplayPort
[ 15.190] (--) NVIDIA(0): DFP-2: 960.0 MHz maximum pixel clock
[ 15.190] (--) NVIDIA(0):
[ 15.190] (--) NVIDIA(0): DFP-3: disconnected
[ 15.190] (--) NVIDIA(0): DFP-3: Internal TMDS
[ 15.190] (--) NVIDIA(0): DFP-3: 330.0 MHz maximum pixel clock
[ 15.190] (--) NVIDIA(0):
[ 15.190] (--) NVIDIA(0): DFP-4: disconnected
[ 15.190] (--) NVIDIA(0): DFP-4: Internal TMDS
[ 15.190] (--) NVIDIA(0): DFP-4: 330.0 MHz maximum pixel clock
[ 15.190] (--) NVIDIA(0):
[ 15.190] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 15.190] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 970 (GM204-A) at PCI:1:0:0 (GPU-0)
[ 15.190] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 15.190] (--) NVIDIA(0): VideoBIOS: 84.04.1f.00.2b
[ 15.190] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 15.190] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 15.190] (**) NVIDIA(0): device BenQ XL2411Z (DFP-0) (Using EDID frequencies has
[ 15.190] (**) NVIDIA(0): been enabled on all display devices.)
[ 15.191] (II) NVIDIA(0): Validated MetaModes:
[ 15.191] (II) NVIDIA(0): "1920x1080_60+0+0"
[ 15.191] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 15.214] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
[ 15.214] (--) NVIDIA(0): option
[ 15.214] (--) Depth 24 pixmap format is 32 bpp
[ 15.214] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 15.214] (II) NVIDIA: access.
[ 15.216] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 15.216] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 15.216] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 15.216] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 15.216] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 15.216] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 15.216] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 15.216] (II) NVIDIA(0): Config Options in the README.
[ 15.853] (II) NVIDIA(0): Setting mode "1920x1080_60+0+0"
[ 15.917] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 15.917] (==) NVIDIA(0): Backing store enabled
[ 15.917] (==) NVIDIA(0): Silken mouse enabled
[ 15.917] (**) NVIDIA(0): DPMS enabled
[ 15.918] (II) Loading sub module "x11glvnd"
[ 15.918] (II) LoadModule: "x11glvnd"
[ 15.918] (II) Loading /usr/lib/xorg/modules/extensions/x11glvnd.so
[ 15.926] (II) Module x11glvnd: vendor="X.Org Foundation"
[ 15.926] compiled for 4.0.2, module version = 1.0.0
[ 15.926] Module class: X.Org Server Extension
[ 15.926] (II) x11glvnd Loading
[ 15.926] (II) Loading sub module "dri2"
[ 15.926] (II) LoadModule: "dri2"
[ 15.926] (II) Module "dri2" already built-in
[ 15.926] (II) NVIDIA(0): [DRI2] Setup complete
[ 15.926] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 15.926] (--) RandR disabled
[ 15.940] (II) Initializing extension GLX
[ 15.940] (II) Indirect GLX disabled.
[ 16.220] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 16.220] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.220] (II) LoadModule: "evdev"
[ 16.220] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.245] (II) Module evdev: vendor="X.Org Foundation"
[ 16.245] compiled for 1.18.0, module version = 2.10.1
[ 16.245] Module class: X.Org XInput Driver
[ 16.245] ABI class: X.Org XInput driver, version 22.1
[ 16.246] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 30 paused 0
[ 16.246] (II) Using input driver 'evdev' for 'Power Button'
[ 16.246] (**) Power Button: always reports core events
[ 16.246] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 16.246] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.246] (--) evdev: Power Button: Found keys
[ 16.246] (II) evdev: Power Button: Configuring as keyboard
[ 16.246] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event5"
[ 16.246] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 16.246] (**) Option "xkb_rules" "evdev"
[ 16.246] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 16.246] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.246] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 31 paused 0
[ 16.246] (II) Using input driver 'evdev' for 'Power Button'
[ 16.246] (**) Power Button: always reports core events
[ 16.246] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 16.246] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.246] (--) evdev: Power Button: Found keys
[ 16.246] (II) evdev: Power Button: Configuring as keyboard
[ 16.246] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event3"
[ 16.246] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 16.246] (**) Option "xkb_rules" "evdev"
[ 16.247] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 16.247] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 16.247] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 32 paused 0
[ 16.247] (II) Using input driver 'evdev' for 'Sleep Button'
[ 16.247] (**) Sleep Button: always reports core events
[ 16.247] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 16.247] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 16.247] (--) evdev: Sleep Button: Found keys
[ 16.247] (II) evdev: Sleep Button: Configuring as keyboard
[ 16.247] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event4"
[ 16.247] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 16.247] (**) Option "xkb_rules" "evdev"
[ 16.247] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[ 16.247] (II) No input driver specified, ignoring this device.
[ 16.247] (II) This device may have been added with another device file.
[ 16.247] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
[ 16.247] (II) No input driver specified, ignoring this device.
[ 16.247] (II) This device may have been added with another device file.
[ 16.247] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event18)
[ 16.247] (II) No input driver specified, ignoring this device.
[ 16.247] (II) This device may have been added with another device file.
[ 16.248] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event19)
[ 16.248] (II) No input driver specified, ignoring this device.
[ 16.248] (II) This device may have been added with another device file.
[ 16.248] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event0)
[ 16.248] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 16.300] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 33 paused 0
[ 16.300] (II) Using input driver 'evdev' for 'USB OPTICAL MOUSE'
[ 16.300] (**) USB OPTICAL MOUSE: always reports core events
[ 16.300] (**) evdev: USB OPTICAL MOUSE: Device: "/dev/input/event0"
[ 16.300] (--) evdev: USB OPTICAL MOUSE: Vendor 0x93a Product 0x2521
[ 16.300] (--) evdev: USB OPTICAL MOUSE: Found 9 mouse buttons
[ 16.300] (--) evdev: USB OPTICAL MOUSE: Found scroll wheel(s)
[ 16.300] (--) evdev: USB OPTICAL MOUSE: Found relative axes
[ 16.300] (--) evdev: USB OPTICAL MOUSE: Found x and y relative axes
[ 16.300] (II) evdev: USB OPTICAL MOUSE: Configuring as mouse
[ 16.300] (II) evdev: USB OPTICAL MOUSE: Adding scrollwheel support
[ 16.300] (**) evdev: USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 16.300] (**) evdev: USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.300] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:093A:2521.0001/input/input2/event0"
[ 16.300] (II) XINPUT: Adding extended input device "USB OPTICAL MOUSE" (type: MOUSE, id 9)
[ 16.300] (II) evdev: USB OPTICAL MOUSE: initialized for relative axes.
[ 16.300] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 16.300] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 16.300] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 16.300] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 16.300] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 16.300] (II) No input driver specified, ignoring this device.
[ 16.300] (II) This device may have been added with another device file.
[ 16.300] (II) config/udev: Adding input device SINO WEALTH USB KEYBOARD (/dev/input/event1)
[ 16.300] (**) SINO WEALTH USB KEYBOARD: Applying InputClass "evdev keyboard catchall"
[ 16.301] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 34 paused 0
[ 16.301] (II) Using input driver 'evdev' for 'SINO WEALTH USB KEYBOARD'
[ 16.301] (**) SINO WEALTH USB KEYBOARD: always reports core events
[ 16.301] (**) evdev: SINO WEALTH USB KEYBOARD: Device: "/dev/input/event1"
[ 16.301] (--) evdev: SINO WEALTH USB KEYBOARD: Vendor 0x258a Product 0x1
[ 16.301] (--) evdev: SINO WEALTH USB KEYBOARD: Found keys
[ 16.301] (II) evdev: SINO WEALTH USB KEYBOARD: Configuring as keyboard
[ 16.301] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:258A:0001.0002/input/input3/event1"
[ 16.301] (II) XINPUT: Adding extended input device "SINO WEALTH USB KEYBOARD" (type: KEYBOARD, id 10)
[ 16.301] (**) Option "xkb_rules" "evdev"
[ 16.301] (II) config/udev: Adding input device SINO WEALTH USB KEYBOARD (/dev/input/event2)
[ 16.301] (**) SINO WEALTH USB KEYBOARD: Applying InputClass "evdev keyboard catchall"
[ 16.301] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 35 paused 0
[ 16.301] (II) Using input driver 'evdev' for 'SINO WEALTH USB KEYBOARD'
[ 16.301] (**) SINO WEALTH USB KEYBOARD: always reports core events
[ 16.301] (**) evdev: SINO WEALTH USB KEYBOARD: Device: "/dev/input/event2"
[ 16.301] (--) evdev: SINO WEALTH USB KEYBOARD: Vendor 0x258a Product 0x1
[ 16.301] (--) evdev: SINO WEALTH USB KEYBOARD: Found keys
[ 16.301] (II) evdev: SINO WEALTH USB KEYBOARD: Configuring as keyboard
[ 16.301] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:258A:0001.0003/input/input4/event2"
[ 16.301] (II) XINPUT: Adding extended input device "SINO WEALTH USB KEYBOARD" (type: KEYBOARD, id 11)
[ 16.301] (**) Option "xkb_rules" "evdev"
[ 16.302] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/event20)
[ 16.302] (II) No input driver specified, ignoring this device.
[ 16.302] (II) This device may have been added with another device file.
[ 16.302] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/js0)
[ 16.302] (II) No input driver specified, ignoring this device.
[ 16.302] (II) This device may have been added with another device file.
[ 16.302] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/event21)
[ 16.302] (II) No input driver specified, ignoring this device.
[ 16.302] (II) This device may have been added with another device file.
[ 16.302] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/js1)
[ 16.302] (II) No input driver specified, ignoring this device.
[ 16.302] (II) This device may have been added with another device file.
[ 16.302] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/event22)
[ 16.302] (II) No input driver specified, ignoring this device.
[ 16.302] (II) This device may have been added with another device file.
[ 16.302] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/js2)
[ 16.302] (II) No input driver specified, ignoring this device.
[ 16.302] (II) This device may have been added with another device file.
[ 16.303] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/event23)
[ 16.303] (II) No input driver specified, ignoring this device.
[ 16.303] (II) This device may have been added with another device file.
[ 16.303] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/js3)
[ 16.303] (II) No input driver specified, ignoring this device.
[ 16.303] (II) This device may have been added with another device file.
[ 16.303] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 16.303] (II) No input driver specified, ignoring this device.
[ 16.303] (II) This device may have been added with another device file.
[ 16.303] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event8)
[ 16.303] (II) No input driver specified, ignoring this device.
[ 16.303] (II) This device may have been added with another device file.
[ 16.303] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event9)
[ 16.303] (II) No input driver specified, ignoring this device.
[ 16.303] (II) This device may have been added with another device file.
[ 16.303] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event10)
[ 16.303] (II) No input driver specified, ignoring this device.
[ 16.303] (II) This device may have been added with another device file.
[ 16.303] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event11)
[ 16.303] (II) No input driver specified, ignoring this device.
[ 16.303] (II) This device may have been added with another device file.
[ 16.304] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event12)
[ 16.304] (II) No input driver specified, ignoring this device.
[ 16.304] (II) This device may have been added with another device file.
[ 16.304] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event13)
[ 16.304] (II) No input driver specified, ignoring this device.
[ 16.304] (II) This device may have been added with another device file.
[ 16.304] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event14)
[ 16.304] (II) No input driver specified, ignoring this device.
[ 16.304] (II) This device may have been added with another device file.
[ 16.304] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event15)
[ 16.304] (II) No input driver specified, ignoring this device.
[ 16.304] (II) This device may have been added with another device file.
[ 16.304] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 16.304] (II) No input driver specified, ignoring this device.
[ 16.304] (II) This device may have been added with another device file.
[ 16.365] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): connected
[ 16.365] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 16.365] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 16.365] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 16.365] (--) NVIDIA(GPU-0):
[ 16.425] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): connected
[ 16.425] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 16.425] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 16.425] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 16.425] (--) NVIDIA(GPU-0):
[ 20.655] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 20.655] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 20.655] (--) NVIDIA(GPU-0):
[ 20.715] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): connected
[ 20.715] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 20.715] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 20.715] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 20.715] (--) NVIDIA(GPU-0):
[ 20.715] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 20.715] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 20.715] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[ 20.715] (--) NVIDIA(GPU-0):
[ 20.715] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 20.715] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 20.715] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 20.715] (--) NVIDIA(GPU-0):
[ 20.715] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 20.715] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 20.715] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 20.715] (--) NVIDIA(GPU-0):
[ 20.715] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 20.715] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 20.715] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 20.715] (--) NVIDIA(GPU-0):
[ 26.307] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 26.307] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 26.307] (--) NVIDIA(GPU-0):
[ 26.367] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): connected
[ 26.367] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 26.367] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 26.367] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 26.367] (--) NVIDIA(GPU-0):
[ 26.367] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 26.367] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 26.367] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[ 26.367] (--) NVIDIA(GPU-0):
[ 26.367] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 26.367] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 26.367] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 26.367] (--) NVIDIA(GPU-0):
[ 26.367] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 26.367] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 26.367] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 26.367] (--) NVIDIA(GPU-0):
[ 26.367] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 26.367] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 26.367] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 26.367] (--) NVIDIA(GPU-0):
[ 46.756] (II) systemd-logind: got pause for 13:69
[ 46.756] (II) systemd-logind: got pause for 13:65
[ 46.756] (II) systemd-logind: got pause for 13:66
[ 46.756] (II) systemd-logind: got pause for 226:0
[ 46.756] (II) systemd-logind: got pause for 13:64
[ 46.756] (II) systemd-logind: got pause for 13:67
[ 46.756] (II) systemd-logind: got pause for 13:68
Codice: Seleziona tutto
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 16384 x 16384
DVI-I-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 531mm x 298mm
1920x1080 60.00 + 144.00 119.98* 99.93
1440x900 119.85
1280x1024 119.96 75.02 60.02
1024x768 119.99 75.03 60.00
800x600 119.97 75.00 60.32
640x480 120.01 75.00 59.94
HDMI-0 disconnected (normal left inverted right x axis y axis)
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
DVI-D-0 disconnected (normal left inverted right x axis y axis)
Put the fun back into computing.
Arch 64bit con Cinnamon/Xfce4.12 su ASUS X52JB (Intel Pentium P6100, 4Gb RAM e ATI Mobility Radeon HD 5145)
Arch 64bit con Cinnamon (Intel Core i5-4690K e Asus nVidia GTX-970 Strix Direct CU II OC)
Arch 64bit con Cinnamon/Xfce4.12 su ASUS X52JB (Intel Pentium P6100, 4Gb RAM e ATI Mobility Radeon HD 5145)
Arch 64bit con Cinnamon (Intel Core i5-4690K e Asus nVidia GTX-970 Strix Direct CU II OC)
Re: Impostare frequenza di aggiornamento verticale monitor
Ho dato un'occhiata al man della configurazione di Xorg per i driver proprietari nvidia, ed ho notato che da nessuna parte cita la possibilità di impostare a frequenza di refresh nei metamode. Ho il sospetto che sia stata totla questa possibilità nei nuovi driver, ma che non sia stato aggiornato il programma di configurazione. Ma è solo un'ipotesi. Apri /etc/X11/xorg.conf, e nella sezione Monitor, modifica questa riga
così
Riavvia il sistema e posta i soliti due file.
Codice: Seleziona tutto
VertRefresh 56.0 - 144.0
Codice: Seleziona tutto
VertRefresh 56.0 - 60.0
Offertissima: Mi Vendo!!! Cercasi lavoro o corso di formazione finanziato in tutta italia da Roma in su, oppure in provincia di Catanzaro.
In particolare sono interessato ad opportunità su Roma.
In particolare sono interessato ad opportunità su Roma.
-
- Arciere
- Messaggi: 226
- Iscritto il: 11 febbraio 2015, 16:53
- Architettura: x86_64 (64bit)
Re: Impostare frequenza di aggiornamento verticale monitor
Fatto, ecco i file:
Codice: Seleziona tutto
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 16384 x 16384
DVI-I-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 531mm x 298mm
1920x1080 60.00 + 144.00 119.98* 99.93
1440x900 119.85
1280x1024 119.96 75.02 60.02
1024x768 119.99 75.03 60.00
800x600 119.97 75.00 60.32
640x480 120.01 75.00 59.94
HDMI-0 disconnected (normal left inverted right x axis y axis)
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
DVI-D-0 disconnected (normal left inverted right x axis y axis)
Codice: Seleziona tutto
[ 13.865] (--) Log file renamed from "/var/log/Xorg.pid-561.log" to "/var/log/Xorg.0.log"
[ 13.915]
X.Org X Server 1.18.1
Release Date: 2016-02-08
[ 13.915] X Protocol Version 11, Revision 0
[ 13.915] Build Operating System: Linux 4.2.5-1-ARCH x86_64
[ 13.915] Current Operating System: Linux archcomputer 4.4.5-1-ARCH #1 SMP PREEMPT Thu Mar 10 07:38:19 CET 2016 x86_64
[ 13.915] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=00207c10-d846-4354-b73c-bbb3a3223dc7 rw
[ 13.915] Build Date: 11 February 2016 09:57:03AM
[ 13.915]
[ 13.915] Current version of pixman: 0.34.0
[ 13.915] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.915] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.915] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 24 15:21:57 2016
[ 13.980] (==) Using config file: "/etc/X11/xorg.conf"
[ 13.980] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 14.004] (==) ServerLayout "Layout0"
[ 14.004] (**) |-->Screen "Screen0" (0)
[ 14.004] (**) | |-->Monitor "Monitor0"
[ 14.004] (**) | |-->Device "Device0"
[ 14.004] (**) |-->Input Device "Keyboard0"
[ 14.004] (**) |-->Input Device "Mouse0"
[ 14.005] (**) Option "Xinerama" "0"
[ 14.005] (==) Automatically adding devices
[ 14.005] (==) Automatically enabling devices
[ 14.005] (==) Automatically adding GPU devices
[ 14.005] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 14.029] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 14.029] Entry deleted from font path.
[ 14.029] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 14.029] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 14.029] Entry deleted from font path.
[ 14.029] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 14.029] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 14.029] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 14.029] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 14.029] (WW) Disabling Keyboard0
[ 14.029] (WW) Disabling Mouse0
[ 14.029] (II) Loader magic: 0x81ad60
[ 14.029] (II) Module ABI versions:
[ 14.029] X.Org ANSI C Emulation: 0.4
[ 14.029] X.Org Video Driver: 20.0
[ 14.029] X.Org XInput driver : 22.1
[ 14.029] X.Org Server Extension : 9.0
[ 14.029] (++) using VT number 1
[ 14.030] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 14.030] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 14.030] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 9 paused 0
[ 14.031] (--) PCI:*(0:1:0:0) 10de:13c2:1043:8508 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 14.031] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 14.031] (II) LoadModule: "glx"
[ 14.070] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 14.483] (II) Module glx: vendor="NVIDIA Corporation"
[ 14.483] compiled for 4.0.2, module version = 1.0.0
[ 14.483] Module class: X.Org Server Extension
[ 14.483] (II) NVIDIA GLX Module 361.28 Wed Feb 3 15:10:57 PST 2016
[ 14.487] (II) LoadModule: "nvidia"
[ 14.498] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 14.524] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 14.524] compiled for 4.0.2, module version = 1.0.0
[ 14.524] Module class: X.Org Video Driver
[ 14.524] (II) NVIDIA dlloader X Driver 361.28 Wed Feb 3 14:48:10 PST 2016
[ 14.524] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 14.530] (II) Loading sub module "fb"
[ 14.530] (II) LoadModule: "fb"
[ 14.544] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 14.550] (II) Module fb: vendor="X.Org Foundation"
[ 14.550] compiled for 1.18.1, module version = 1.0.0
[ 14.550] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.550] (II) Loading sub module "wfb"
[ 14.550] (II) LoadModule: "wfb"
[ 14.550] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 14.551] (II) Module wfb: vendor="X.Org Foundation"
[ 14.551] compiled for 1.18.1, module version = 1.0.0
[ 14.551] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.551] (II) Loading sub module "ramdac"
[ 14.551] (II) LoadModule: "ramdac"
[ 14.551] (II) Module "ramdac" already built-in
[ 14.565] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 14.565] (==) NVIDIA(0): RGB weight 888
[ 14.565] (==) NVIDIA(0): Default visual is TrueColor
[ 14.565] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 14.565] (**) NVIDIA(0): Option "Stereo" "0"
[ 14.565] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP-0"
[ 14.565] (**) NVIDIA(0): Option "SLI" "Off"
[ 14.565] (**) NVIDIA(0): Option "MultiGPU" "Off"
[ 14.565] (**) NVIDIA(0): Option "BaseMosaic" "off"
[ 14.565] (**) NVIDIA(0): Stereo disabled by request
[ 14.565] (**) NVIDIA(0): NVIDIA SLI disabled.
[ 14.565] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[ 14.565] (**) NVIDIA(0): Option "MetaModes" "1920x1080_60 +0+0"
[ 14.565] (**) NVIDIA(0): Enabling 2D acceleration
[ 15.315] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 15.315] (--) NVIDIA(0): CRT-0
[ 15.315] (--) NVIDIA(0): DFP-0 (boot)
[ 15.315] (--) NVIDIA(0): DFP-1
[ 15.315] (--) NVIDIA(0): DFP-2
[ 15.315] (--) NVIDIA(0): DFP-3
[ 15.315] (--) NVIDIA(0): DFP-4
[ 15.345] (--) NVIDIA(0): CRT-0: disconnected
[ 15.345] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 15.345] (--) NVIDIA(0):
[ 15.404] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): connected
[ 15.404] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 15.404] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 15.404] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 15.404] (--) NVIDIA(0):
[ 15.405] (--) NVIDIA(0): DFP-1: disconnected
[ 15.405] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 15.405] (--) NVIDIA(0): DFP-1: 330.0 MHz maximum pixel clock
[ 15.405] (--) NVIDIA(0):
[ 15.405] (--) NVIDIA(0): DFP-2: disconnected
[ 15.405] (--) NVIDIA(0): DFP-2: Internal DisplayPort
[ 15.405] (--) NVIDIA(0): DFP-2: 960.0 MHz maximum pixel clock
[ 15.405] (--) NVIDIA(0):
[ 15.405] (--) NVIDIA(0): DFP-3: disconnected
[ 15.405] (--) NVIDIA(0): DFP-3: Internal TMDS
[ 15.405] (--) NVIDIA(0): DFP-3: 330.0 MHz maximum pixel clock
[ 15.405] (--) NVIDIA(0):
[ 15.405] (--) NVIDIA(0): DFP-4: disconnected
[ 15.405] (--) NVIDIA(0): DFP-4: Internal TMDS
[ 15.405] (--) NVIDIA(0): DFP-4: 330.0 MHz maximum pixel clock
[ 15.405] (--) NVIDIA(0):
[ 15.405] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 15.405] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 970 (GM204-A) at PCI:1:0:0 (GPU-0)
[ 15.405] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 15.405] (--) NVIDIA(0): VideoBIOS: 84.04.1f.00.2b
[ 15.405] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 15.405] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 15.405] (**) NVIDIA(0): device BenQ XL2411Z (DFP-0) (Using EDID frequencies has
[ 15.405] (**) NVIDIA(0): been enabled on all display devices.)
[ 15.407] (II) NVIDIA(0): Validated MetaModes:
[ 15.407] (II) NVIDIA(0): "1920x1080_60+0+0"
[ 15.407] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 15.430] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
[ 15.430] (--) NVIDIA(0): option
[ 15.430] (--) Depth 24 pixmap format is 32 bpp
[ 15.431] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 15.431] (II) NVIDIA: access.
[ 15.433] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 15.433] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 15.433] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 15.433] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 15.433] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 15.433] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 15.433] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 15.433] (II) NVIDIA(0): Config Options in the README.
[ 16.058] (II) NVIDIA(0): Setting mode "1920x1080_60+0+0"
[ 16.133] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 16.133] (==) NVIDIA(0): Backing store enabled
[ 16.133] (==) NVIDIA(0): Silken mouse enabled
[ 16.134] (**) NVIDIA(0): DPMS enabled
[ 16.134] (II) Loading sub module "x11glvnd"
[ 16.134] (II) LoadModule: "x11glvnd"
[ 16.134] (II) Loading /usr/lib/xorg/modules/extensions/x11glvnd.so
[ 16.142] (II) Module x11glvnd: vendor="X.Org Foundation"
[ 16.142] compiled for 4.0.2, module version = 1.0.0
[ 16.142] Module class: X.Org Server Extension
[ 16.142] (II) x11glvnd Loading
[ 16.142] (II) Loading sub module "dri2"
[ 16.142] (II) LoadModule: "dri2"
[ 16.142] (II) Module "dri2" already built-in
[ 16.142] (II) NVIDIA(0): [DRI2] Setup complete
[ 16.142] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 16.142] (--) RandR disabled
[ 16.145] (II) Initializing extension GLX
[ 16.145] (II) Indirect GLX disabled.
[ 16.458] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 16.458] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.458] (II) LoadModule: "evdev"
[ 16.458] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.487] (II) Module evdev: vendor="X.Org Foundation"
[ 16.487] compiled for 1.18.0, module version = 2.10.1
[ 16.487] Module class: X.Org XInput Driver
[ 16.487] ABI class: X.Org XInput driver, version 22.1
[ 16.487] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 30 paused 0
[ 16.487] (II) Using input driver 'evdev' for 'Power Button'
[ 16.487] (**) Power Button: always reports core events
[ 16.487] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 16.487] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.487] (--) evdev: Power Button: Found keys
[ 16.487] (II) evdev: Power Button: Configuring as keyboard
[ 16.487] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event5"
[ 16.487] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 16.487] (**) Option "xkb_rules" "evdev"
[ 16.487] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 16.487] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.488] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 31 paused 0
[ 16.488] (II) Using input driver 'evdev' for 'Power Button'
[ 16.488] (**) Power Button: always reports core events
[ 16.488] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 16.488] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.488] (--) evdev: Power Button: Found keys
[ 16.488] (II) evdev: Power Button: Configuring as keyboard
[ 16.488] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event3"
[ 16.488] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 16.488] (**) Option "xkb_rules" "evdev"
[ 16.488] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 16.488] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 16.488] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 32 paused 0
[ 16.488] (II) Using input driver 'evdev' for 'Sleep Button'
[ 16.488] (**) Sleep Button: always reports core events
[ 16.488] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 16.488] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 16.488] (--) evdev: Sleep Button: Found keys
[ 16.488] (II) evdev: Sleep Button: Configuring as keyboard
[ 16.488] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event4"
[ 16.488] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 16.488] (**) Option "xkb_rules" "evdev"
[ 16.489] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[ 16.489] (II) No input driver specified, ignoring this device.
[ 16.489] (II) This device may have been added with another device file.
[ 16.489] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
[ 16.489] (II) No input driver specified, ignoring this device.
[ 16.489] (II) This device may have been added with another device file.
[ 16.489] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event18)
[ 16.489] (II) No input driver specified, ignoring this device.
[ 16.489] (II) This device may have been added with another device file.
[ 16.489] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event19)
[ 16.489] (II) No input driver specified, ignoring this device.
[ 16.489] (II) This device may have been added with another device file.
[ 16.489] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event0)
[ 16.489] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 16.543] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 33 paused 0
[ 16.543] (II) Using input driver 'evdev' for 'USB OPTICAL MOUSE'
[ 16.543] (**) USB OPTICAL MOUSE: always reports core events
[ 16.543] (**) evdev: USB OPTICAL MOUSE: Device: "/dev/input/event0"
[ 16.543] (--) evdev: USB OPTICAL MOUSE: Vendor 0x93a Product 0x2521
[ 16.543] (--) evdev: USB OPTICAL MOUSE: Found 9 mouse buttons
[ 16.543] (--) evdev: USB OPTICAL MOUSE: Found scroll wheel(s)
[ 16.543] (--) evdev: USB OPTICAL MOUSE: Found relative axes
[ 16.543] (--) evdev: USB OPTICAL MOUSE: Found x and y relative axes
[ 16.543] (II) evdev: USB OPTICAL MOUSE: Configuring as mouse
[ 16.543] (II) evdev: USB OPTICAL MOUSE: Adding scrollwheel support
[ 16.543] (**) evdev: USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 16.543] (**) evdev: USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.543] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:093A:2521.0001/input/input2/event0"
[ 16.543] (II) XINPUT: Adding extended input device "USB OPTICAL MOUSE" (type: MOUSE, id 9)
[ 16.543] (II) evdev: USB OPTICAL MOUSE: initialized for relative axes.
[ 16.543] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 16.543] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 16.543] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 16.543] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 16.543] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 16.543] (II) No input driver specified, ignoring this device.
[ 16.543] (II) This device may have been added with another device file.
[ 16.544] (II) config/udev: Adding input device SINO WEALTH USB KEYBOARD (/dev/input/event1)
[ 16.544] (**) SINO WEALTH USB KEYBOARD: Applying InputClass "evdev keyboard catchall"
[ 16.544] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 34 paused 0
[ 16.544] (II) Using input driver 'evdev' for 'SINO WEALTH USB KEYBOARD'
[ 16.544] (**) SINO WEALTH USB KEYBOARD: always reports core events
[ 16.544] (**) evdev: SINO WEALTH USB KEYBOARD: Device: "/dev/input/event1"
[ 16.544] (--) evdev: SINO WEALTH USB KEYBOARD: Vendor 0x258a Product 0x1
[ 16.544] (--) evdev: SINO WEALTH USB KEYBOARD: Found keys
[ 16.544] (II) evdev: SINO WEALTH USB KEYBOARD: Configuring as keyboard
[ 16.544] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:258A:0001.0002/input/input3/event1"
[ 16.544] (II) XINPUT: Adding extended input device "SINO WEALTH USB KEYBOARD" (type: KEYBOARD, id 10)
[ 16.544] (**) Option "xkb_rules" "evdev"
[ 16.544] (II) config/udev: Adding input device SINO WEALTH USB KEYBOARD (/dev/input/event2)
[ 16.544] (**) SINO WEALTH USB KEYBOARD: Applying InputClass "evdev keyboard catchall"
[ 16.545] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 35 paused 0
[ 16.545] (II) Using input driver 'evdev' for 'SINO WEALTH USB KEYBOARD'
[ 16.545] (**) SINO WEALTH USB KEYBOARD: always reports core events
[ 16.545] (**) evdev: SINO WEALTH USB KEYBOARD: Device: "/dev/input/event2"
[ 16.545] (--) evdev: SINO WEALTH USB KEYBOARD: Vendor 0x258a Product 0x1
[ 16.545] (--) evdev: SINO WEALTH USB KEYBOARD: Found keys
[ 16.545] (II) evdev: SINO WEALTH USB KEYBOARD: Configuring as keyboard
[ 16.545] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:258A:0001.0003/input/input4/event2"
[ 16.545] (II) XINPUT: Adding extended input device "SINO WEALTH USB KEYBOARD" (type: KEYBOARD, id 11)
[ 16.545] (**) Option "xkb_rules" "evdev"
[ 16.545] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/event20)
[ 16.545] (II) No input driver specified, ignoring this device.
[ 16.545] (II) This device may have been added with another device file.
[ 16.545] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/js0)
[ 16.545] (II) No input driver specified, ignoring this device.
[ 16.545] (II) This device may have been added with another device file.
[ 16.545] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/event21)
[ 16.545] (II) No input driver specified, ignoring this device.
[ 16.545] (II) This device may have been added with another device file.
[ 16.546] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/js1)
[ 16.546] (II) No input driver specified, ignoring this device.
[ 16.546] (II) This device may have been added with another device file.
[ 16.546] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/event22)
[ 16.546] (II) No input driver specified, ignoring this device.
[ 16.546] (II) This device may have been added with another device file.
[ 16.546] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/js2)
[ 16.546] (II) No input driver specified, ignoring this device.
[ 16.546] (II) This device may have been added with another device file.
[ 16.546] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/event23)
[ 16.546] (II) No input driver specified, ignoring this device.
[ 16.546] (II) This device may have been added with another device file.
[ 16.546] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/js3)
[ 16.546] (II) No input driver specified, ignoring this device.
[ 16.546] (II) This device may have been added with another device file.
[ 16.546] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event8)
[ 16.546] (II) No input driver specified, ignoring this device.
[ 16.546] (II) This device may have been added with another device file.
[ 16.547] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event9)
[ 16.547] (II) No input driver specified, ignoring this device.
[ 16.547] (II) This device may have been added with another device file.
[ 16.547] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event10)
[ 16.547] (II) No input driver specified, ignoring this device.
[ 16.547] (II) This device may have been added with another device file.
[ 16.547] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event11)
[ 16.547] (II) No input driver specified, ignoring this device.
[ 16.547] (II) This device may have been added with another device file.
[ 16.547] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event12)
[ 16.547] (II) No input driver specified, ignoring this device.
[ 16.547] (II) This device may have been added with another device file.
[ 16.547] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event13)
[ 16.547] (II) No input driver specified, ignoring this device.
[ 16.547] (II) This device may have been added with another device file.
[ 16.547] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event14)
[ 16.547] (II) No input driver specified, ignoring this device.
[ 16.547] (II) This device may have been added with another device file.
[ 16.547] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 16.547] (II) No input driver specified, ignoring this device.
[ 16.547] (II) This device may have been added with another device file.
[ 16.547] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event7)
[ 16.547] (II) No input driver specified, ignoring this device.
[ 16.547] (II) This device may have been added with another device file.
[ 16.548] (II) config/udev: Adding input device PC Speaker (/dev/input/event15)
[ 16.548] (II) No input driver specified, ignoring this device.
[ 16.548] (II) This device may have been added with another device file.
[ 20.271] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 20.271] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 20.271] (--) NVIDIA(GPU-0):
[ 20.331] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): connected
[ 20.331] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 20.331] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 20.331] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 20.331] (--) NVIDIA(GPU-0):
[ 20.331] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 20.331] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 20.331] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[ 20.331] (--) NVIDIA(GPU-0):
[ 20.331] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 20.331] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 20.331] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 20.331] (--) NVIDIA(GPU-0):
[ 20.331] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 20.331] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 20.331] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 20.331] (--) NVIDIA(GPU-0):
[ 20.331] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 20.331] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 20.331] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 20.331] (--) NVIDIA(GPU-0):
[ 24.749] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 24.749] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 24.749] (--) NVIDIA(GPU-0):
[ 24.809] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): connected
[ 24.809] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 24.809] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 24.809] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 24.809] (--) NVIDIA(GPU-0):
[ 24.809] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 24.809] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 24.809] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[ 24.809] (--) NVIDIA(GPU-0):
[ 24.809] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 24.809] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 24.809] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 24.809] (--) NVIDIA(GPU-0):
[ 24.809] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 24.809] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 24.809] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 24.809] (--) NVIDIA(GPU-0):
[ 24.809] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 24.809] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 24.809] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 24.809] (--) NVIDIA(GPU-0):
[ 402.590] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): connected
[ 402.590] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 402.590] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 402.590] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 402.590] (--) NVIDIA(GPU-0):
[ 402.655] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): connected
[ 402.655] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 402.655] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 402.655] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 402.655] (--) NVIDIA(GPU-0):
[ 412.798] (II) systemd-logind: got pause for 13:67
[ 412.798] (II) systemd-logind: got pause for 13:68
[ 412.798] (II) systemd-logind: got pause for 13:66
[ 412.798] (II) systemd-logind: got pause for 13:64
[ 412.798] (II) systemd-logind: got pause for 226:0
[ 412.798] (II) systemd-logind: got pause for 13:65
[ 412.798] (II) systemd-logind: got pause for 13:69
Put the fun back into computing.
Arch 64bit con Cinnamon/Xfce4.12 su ASUS X52JB (Intel Pentium P6100, 4Gb RAM e ATI Mobility Radeon HD 5145)
Arch 64bit con Cinnamon (Intel Core i5-4690K e Asus nVidia GTX-970 Strix Direct CU II OC)
Arch 64bit con Cinnamon/Xfce4.12 su ASUS X52JB (Intel Pentium P6100, 4Gb RAM e ATI Mobility Radeon HD 5145)
Arch 64bit con Cinnamon (Intel Core i5-4690K e Asus nVidia GTX-970 Strix Direct CU II OC)
Re: Impostare frequenza di aggiornamento verticale monitor
Incredibile. Modifica la riga che ti ho proposto cos':
riavvia e posta i soliti due file.
Codice: Seleziona tutto
Option "VertRefresh" "DFP-0: 60"
Offertissima: Mi Vendo!!! Cercasi lavoro o corso di formazione finanziato in tutta italia da Roma in su, oppure in provincia di Catanzaro.
In particolare sono interessato ad opportunità su Roma.
In particolare sono interessato ad opportunità su Roma.
-
- Arciere
- Messaggi: 226
- Iscritto il: 11 febbraio 2015, 16:53
- Architettura: x86_64 (64bit)
Re: Impostare frequenza di aggiornamento verticale monitor
Ha funzionato! Si è avviato a 60Hz, posto i due file:
Codice: Seleziona tutto
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 16384 x 16384
DVI-I-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 531mm x 298mm
1920x1080 60.00*+
1280x1024 60.02
1024x768 60.00
800x600 60.32
640x480 59.94
HDMI-0 disconnected (normal left inverted right x axis y axis)
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
DVI-D-0 disconnected (normal left inverted right x axis y axis)
Codice: Seleziona tutto
[ 14.875] (--) Log file renamed from "/var/log/Xorg.pid-605.log" to "/var/log/Xorg.0.log"
[ 14.909]
X.Org X Server 1.18.2
Release Date: 2016-03-11
[ 14.909] X Protocol Version 11, Revision 0
[ 14.909] Build Operating System: Linux 4.2.5-1-ARCH x86_64
[ 14.909] Current Operating System: Linux archcomputer 4.4.5-1-ARCH #1 SMP PREEMPT Thu Mar 10 07:38:19 CET 2016 x86_64
[ 14.909] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=00207c10-d846-4354-b73c-bbb3a3223dc7 rw
[ 14.909] Build Date: 25 March 2016 08:54:41AM
[ 14.909]
[ 14.909] Current version of pixman: 0.34.0
[ 14.909] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 14.909] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 14.909] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 26 15:46:32 2016
[ 15.000] (==) Using config file: "/etc/X11/xorg.conf"
[ 15.000] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 15.178] (==) ServerLayout "Layout0"
[ 15.178] (**) |-->Screen "Screen0" (0)
[ 15.178] (**) | |-->Monitor "Monitor0"
[ 15.179] (**) | |-->Device "Device0"
[ 15.179] (**) |-->Input Device "Keyboard0"
[ 15.179] (**) |-->Input Device "Mouse0"
[ 15.179] (**) Option "Xinerama" "0"
[ 15.179] (==) Automatically adding devices
[ 15.179] (==) Automatically enabling devices
[ 15.179] (==) Automatically adding GPU devices
[ 15.179] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 15.203] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 15.203] Entry deleted from font path.
[ 15.203] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 15.203] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 15.203] Entry deleted from font path.
[ 15.203] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 15.203] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 15.203] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 15.203] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 15.203] (WW) Disabling Keyboard0
[ 15.203] (WW) Disabling Mouse0
[ 15.203] (II) Loader magic: 0x819d20
[ 15.203] (II) Module ABI versions:
[ 15.203] X.Org ANSI C Emulation: 0.4
[ 15.203] X.Org Video Driver: 20.0
[ 15.203] X.Org XInput driver : 22.1
[ 15.203] X.Org Server Extension : 9.0
[ 15.203] (++) using VT number 1
[ 15.204] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 15.204] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 15.204] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 9 paused 0
[ 15.205] (--) PCI:*(0:1:0:0) 10de:13c2:1043:8508 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 15.205] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 15.205] (II) LoadModule: "glx"
[ 15.245] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 15.603] (II) Module glx: vendor="NVIDIA Corporation"
[ 15.603] compiled for 4.0.2, module version = 1.0.0
[ 15.603] Module class: X.Org Server Extension
[ 15.606] (II) NVIDIA GLX Module 361.28 Wed Feb 3 15:10:57 PST 2016
[ 15.619] (II) LoadModule: "nvidia"
[ 15.631] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 15.656] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 15.656] compiled for 4.0.2, module version = 1.0.0
[ 15.656] Module class: X.Org Video Driver
[ 15.661] (II) NVIDIA dlloader X Driver 361.28 Wed Feb 3 14:48:10 PST 2016
[ 15.661] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 15.670] (II) Loading sub module "fb"
[ 15.670] (II) LoadModule: "fb"
[ 15.684] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 15.694] (II) Module fb: vendor="X.Org Foundation"
[ 15.694] compiled for 1.18.2, module version = 1.0.0
[ 15.694] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.694] (II) Loading sub module "wfb"
[ 15.694] (II) LoadModule: "wfb"
[ 15.694] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 15.698] (II) Module wfb: vendor="X.Org Foundation"
[ 15.698] compiled for 1.18.2, module version = 1.0.0
[ 15.698] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.698] (II) Loading sub module "ramdac"
[ 15.698] (II) LoadModule: "ramdac"
[ 15.698] (II) Module "ramdac" already built-in
[ 15.706] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 15.706] (==) NVIDIA(0): RGB weight 888
[ 15.706] (==) NVIDIA(0): Default visual is TrueColor
[ 15.706] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 15.706] (**) NVIDIA(0): Option "Stereo" "0"
[ 15.706] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP-0"
[ 15.706] (**) NVIDIA(0): Option "VertRefresh" "DFP-0: 60"
[ 15.706] (**) NVIDIA(0): Option "SLI" "Off"
[ 15.706] (**) NVIDIA(0): Option "MultiGPU" "Off"
[ 15.706] (**) NVIDIA(0): Option "BaseMosaic" "off"
[ 15.706] (**) NVIDIA(0): Stereo disabled by request
[ 15.706] (**) NVIDIA(0): NVIDIA SLI disabled.
[ 15.706] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[ 15.706] (**) NVIDIA(0): Option "MetaModes" "1920x1080_60 +0+0"
[ 15.706] (**) NVIDIA(0): Enabling 2D acceleration
[ 16.406] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 16.406] (--) NVIDIA(0): CRT-0
[ 16.406] (--) NVIDIA(0): DFP-0 (boot)
[ 16.406] (--) NVIDIA(0): DFP-1
[ 16.406] (--) NVIDIA(0): DFP-2
[ 16.406] (--) NVIDIA(0): DFP-3
[ 16.406] (--) NVIDIA(0): DFP-4
[ 16.436] (--) NVIDIA(0): CRT-0: disconnected
[ 16.436] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 16.436] (--) NVIDIA(0):
[ 16.496] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): connected
[ 16.496] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 16.496] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 16.496] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 16.496] (--) NVIDIA(0):
[ 16.496] (--) NVIDIA(0): DFP-1: disconnected
[ 16.496] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 16.496] (--) NVIDIA(0): DFP-1: 330.0 MHz maximum pixel clock
[ 16.496] (--) NVIDIA(0):
[ 16.496] (--) NVIDIA(0): DFP-2: disconnected
[ 16.496] (--) NVIDIA(0): DFP-2: Internal DisplayPort
[ 16.496] (--) NVIDIA(0): DFP-2: 960.0 MHz maximum pixel clock
[ 16.496] (--) NVIDIA(0):
[ 16.496] (--) NVIDIA(0): DFP-3: disconnected
[ 16.496] (--) NVIDIA(0): DFP-3: Internal TMDS
[ 16.496] (--) NVIDIA(0): DFP-3: 330.0 MHz maximum pixel clock
[ 16.496] (--) NVIDIA(0):
[ 16.496] (--) NVIDIA(0): DFP-4: disconnected
[ 16.496] (--) NVIDIA(0): DFP-4: Internal TMDS
[ 16.496] (--) NVIDIA(0): DFP-4: 330.0 MHz maximum pixel clock
[ 16.496] (--) NVIDIA(0):
[ 16.496] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 16.496] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 970 (GM204-A) at PCI:1:0:0 (GPU-0)
[ 16.496] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 16.497] (--) NVIDIA(0): VideoBIOS: 84.04.1f.00.2b
[ 16.497] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 16.497] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 16.497] (**) NVIDIA(0): device BenQ XL2411Z (DFP-0) (Using EDID frequencies has
[ 16.497] (**) NVIDIA(0): been enabled on all display devices.)
[ 16.497] (II) NVIDIA(0): Validated MetaModes:
[ 16.497] (II) NVIDIA(0): "1920x1080_60+0+0"
[ 16.497] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 16.513] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
[ 16.513] (--) NVIDIA(0): option
[ 16.513] (--) Depth 24 pixmap format is 32 bpp
[ 16.513] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 16.513] (II) NVIDIA: access.
[ 16.515] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 16.515] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 16.515] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 16.515] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 16.515] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 16.515] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 16.515] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 16.515] (II) NVIDIA(0): Config Options in the README.
[ 17.154] (II) NVIDIA(0): Setting mode "1920x1080_60+0+0"
[ 17.223] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 17.223] (==) NVIDIA(0): Backing store enabled
[ 17.223] (==) NVIDIA(0): Silken mouse enabled
[ 17.227] (**) NVIDIA(0): DPMS enabled
[ 17.227] (II) Loading sub module "x11glvnd"
[ 17.227] (II) LoadModule: "x11glvnd"
[ 17.227] (II) Loading /usr/lib/xorg/modules/extensions/x11glvnd.so
[ 17.233] (II) Module x11glvnd: vendor="X.Org Foundation"
[ 17.233] compiled for 4.0.2, module version = 1.0.0
[ 17.233] Module class: X.Org Server Extension
[ 17.233] (II) x11glvnd Loading
[ 17.233] (II) Loading sub module "dri2"
[ 17.233] (II) LoadModule: "dri2"
[ 17.233] (II) Module "dri2" already built-in
[ 17.233] (II) NVIDIA(0): [DRI2] Setup complete
[ 17.233] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 17.233] (--) RandR disabled
[ 17.236] (II) Initializing extension GLX
[ 17.236] (II) Indirect GLX disabled.
[ 17.536] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 17.536] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 17.536] (II) LoadModule: "evdev"
[ 17.536] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 17.561] (II) Module evdev: vendor="X.Org Foundation"
[ 17.561] compiled for 1.18.0, module version = 2.10.1
[ 17.561] Module class: X.Org XInput Driver
[ 17.561] ABI class: X.Org XInput driver, version 22.1
[ 17.561] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 30 paused 0
[ 17.561] (II) Using input driver 'evdev' for 'Power Button'
[ 17.561] (**) Power Button: always reports core events
[ 17.561] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 17.561] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 17.561] (--) evdev: Power Button: Found keys
[ 17.561] (II) evdev: Power Button: Configuring as keyboard
[ 17.561] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event5"
[ 17.561] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 17.561] (**) Option "xkb_rules" "evdev"
[ 17.562] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 17.562] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 17.562] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 31 paused 0
[ 17.562] (II) Using input driver 'evdev' for 'Power Button'
[ 17.562] (**) Power Button: always reports core events
[ 17.562] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 17.562] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 17.562] (--) evdev: Power Button: Found keys
[ 17.562] (II) evdev: Power Button: Configuring as keyboard
[ 17.562] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event3"
[ 17.562] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 17.562] (**) Option "xkb_rules" "evdev"
[ 17.562] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 17.562] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 17.562] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 32 paused 0
[ 17.562] (II) Using input driver 'evdev' for 'Sleep Button'
[ 17.562] (**) Sleep Button: always reports core events
[ 17.562] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 17.563] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 17.563] (--) evdev: Sleep Button: Found keys
[ 17.563] (II) evdev: Sleep Button: Configuring as keyboard
[ 17.563] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event4"
[ 17.563] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 17.563] (**) Option "xkb_rules" "evdev"
[ 17.563] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[ 17.563] (II) No input driver specified, ignoring this device.
[ 17.563] (II) This device may have been added with another device file.
[ 17.563] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
[ 17.563] (II) No input driver specified, ignoring this device.
[ 17.563] (II) This device may have been added with another device file.
[ 17.563] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event18)
[ 17.563] (II) No input driver specified, ignoring this device.
[ 17.563] (II) This device may have been added with another device file.
[ 17.563] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event19)
[ 17.563] (II) No input driver specified, ignoring this device.
[ 17.563] (II) This device may have been added with another device file.
[ 17.563] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event0)
[ 17.563] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 17.616] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 33 paused 0
[ 17.616] (II) Using input driver 'evdev' for 'USB OPTICAL MOUSE'
[ 17.616] (**) USB OPTICAL MOUSE: always reports core events
[ 17.616] (**) evdev: USB OPTICAL MOUSE: Device: "/dev/input/event0"
[ 17.616] (--) evdev: USB OPTICAL MOUSE: Vendor 0x93a Product 0x2521
[ 17.616] (--) evdev: USB OPTICAL MOUSE: Found 9 mouse buttons
[ 17.616] (--) evdev: USB OPTICAL MOUSE: Found scroll wheel(s)
[ 17.616] (--) evdev: USB OPTICAL MOUSE: Found relative axes
[ 17.616] (--) evdev: USB OPTICAL MOUSE: Found x and y relative axes
[ 17.616] (II) evdev: USB OPTICAL MOUSE: Configuring as mouse
[ 17.616] (II) evdev: USB OPTICAL MOUSE: Adding scrollwheel support
[ 17.616] (**) evdev: USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 17.616] (**) evdev: USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 17.616] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:093A:2521.0001/input/input2/event0"
[ 17.616] (II) XINPUT: Adding extended input device "USB OPTICAL MOUSE" (type: MOUSE, id 9)
[ 17.616] (II) evdev: USB OPTICAL MOUSE: initialized for relative axes.
[ 17.616] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 17.617] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 17.617] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 17.617] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 17.617] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 17.617] (II) No input driver specified, ignoring this device.
[ 17.617] (II) This device may have been added with another device file.
[ 17.617] (II) config/udev: Adding input device SINO WEALTH USB KEYBOARD (/dev/input/event1)
[ 17.617] (**) SINO WEALTH USB KEYBOARD: Applying InputClass "evdev keyboard catchall"
[ 17.617] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 34 paused 0
[ 17.617] (II) Using input driver 'evdev' for 'SINO WEALTH USB KEYBOARD'
[ 17.617] (**) SINO WEALTH USB KEYBOARD: always reports core events
[ 17.617] (**) evdev: SINO WEALTH USB KEYBOARD: Device: "/dev/input/event1"
[ 17.617] (--) evdev: SINO WEALTH USB KEYBOARD: Vendor 0x258a Product 0x1
[ 17.617] (--) evdev: SINO WEALTH USB KEYBOARD: Found keys
[ 17.617] (II) evdev: SINO WEALTH USB KEYBOARD: Configuring as keyboard
[ 17.617] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:258A:0001.0002/input/input3/event1"
[ 17.617] (II) XINPUT: Adding extended input device "SINO WEALTH USB KEYBOARD" (type: KEYBOARD, id 10)
[ 17.617] (**) Option "xkb_rules" "evdev"
[ 17.618] (II) config/udev: Adding input device SINO WEALTH USB KEYBOARD (/dev/input/event2)
[ 17.618] (**) SINO WEALTH USB KEYBOARD: Applying InputClass "evdev keyboard catchall"
[ 17.618] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 35 paused 0
[ 17.618] (II) Using input driver 'evdev' for 'SINO WEALTH USB KEYBOARD'
[ 17.618] (**) SINO WEALTH USB KEYBOARD: always reports core events
[ 17.618] (**) evdev: SINO WEALTH USB KEYBOARD: Device: "/dev/input/event2"
[ 17.618] (--) evdev: SINO WEALTH USB KEYBOARD: Vendor 0x258a Product 0x1
[ 17.618] (--) evdev: SINO WEALTH USB KEYBOARD: Found keys
[ 17.618] (II) evdev: SINO WEALTH USB KEYBOARD: Configuring as keyboard
[ 17.618] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:258A:0001.0003/input/input4/event2"
[ 17.618] (II) XINPUT: Adding extended input device "SINO WEALTH USB KEYBOARD" (type: KEYBOARD, id 11)
[ 17.618] (**) Option "xkb_rules" "evdev"
[ 17.618] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/event20)
[ 17.618] (II) No input driver specified, ignoring this device.
[ 17.618] (II) This device may have been added with another device file.
[ 17.618] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/js0)
[ 17.618] (II) No input driver specified, ignoring this device.
[ 17.618] (II) This device may have been added with another device file.
[ 17.619] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/event21)
[ 17.619] (II) No input driver specified, ignoring this device.
[ 17.619] (II) This device may have been added with another device file.
[ 17.619] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/js1)
[ 17.619] (II) No input driver specified, ignoring this device.
[ 17.619] (II) This device may have been added with another device file.
[ 17.619] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/event22)
[ 17.619] (II) No input driver specified, ignoring this device.
[ 17.619] (II) This device may have been added with another device file.
[ 17.619] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/js2)
[ 17.619] (II) No input driver specified, ignoring this device.
[ 17.619] (II) This device may have been added with another device file.
[ 17.619] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/event23)
[ 17.619] (II) No input driver specified, ignoring this device.
[ 17.619] (II) This device may have been added with another device file.
[ 17.620] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/js3)
[ 17.620] (II) No input driver specified, ignoring this device.
[ 17.620] (II) This device may have been added with another device file.
[ 17.620] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 17.620] (II) No input driver specified, ignoring this device.
[ 17.620] (II) This device may have been added with another device file.
[ 17.620] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event8)
[ 17.620] (II) No input driver specified, ignoring this device.
[ 17.620] (II) This device may have been added with another device file.
[ 17.620] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event9)
[ 17.620] (II) No input driver specified, ignoring this device.
[ 17.620] (II) This device may have been added with another device file.
[ 17.620] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event10)
[ 17.620] (II) No input driver specified, ignoring this device.
[ 17.620] (II) This device may have been added with another device file.
[ 17.620] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event11)
[ 17.620] (II) No input driver specified, ignoring this device.
[ 17.620] (II) This device may have been added with another device file.
[ 17.620] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event12)
[ 17.620] (II) No input driver specified, ignoring this device.
[ 17.620] (II) This device may have been added with another device file.
[ 17.620] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event13)
[ 17.620] (II) No input driver specified, ignoring this device.
[ 17.620] (II) This device may have been added with another device file.
[ 17.621] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event14)
[ 17.621] (II) No input driver specified, ignoring this device.
[ 17.621] (II) This device may have been added with another device file.
[ 17.621] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event15)
[ 17.621] (II) No input driver specified, ignoring this device.
[ 17.621] (II) This device may have been added with another device file.
[ 17.621] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 17.621] (II) No input driver specified, ignoring this device.
[ 17.621] (II) This device may have been added with another device file.
[ 17.681] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): connected
[ 17.681] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 17.681] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 17.681] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 17.681] (--) NVIDIA(GPU-0):
[ 17.741] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): connected
[ 17.741] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 17.741] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 17.741] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 17.741] (--) NVIDIA(GPU-0):
[ 22.410] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 22.410] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 22.410] (--) NVIDIA(GPU-0):
[ 22.470] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): connected
[ 22.470] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 22.470] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 22.470] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 22.470] (--) NVIDIA(GPU-0):
[ 22.470] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 22.470] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 22.470] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[ 22.470] (--) NVIDIA(GPU-0):
[ 22.470] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 22.470] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 22.470] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 22.470] (--) NVIDIA(GPU-0):
[ 22.470] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 22.470] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 22.470] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 22.470] (--) NVIDIA(GPU-0):
[ 22.470] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 22.470] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 22.470] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 22.470] (--) NVIDIA(GPU-0):
[ 27.156] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 27.156] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 27.156] (--) NVIDIA(GPU-0):
[ 27.216] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): connected
[ 27.216] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 27.216] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 27.216] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 27.216] (--) NVIDIA(GPU-0):
[ 27.216] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 27.216] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 27.216] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[ 27.216] (--) NVIDIA(GPU-0):
[ 27.216] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 27.216] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 27.216] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 27.216] (--) NVIDIA(GPU-0):
[ 27.216] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 27.216] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 27.216] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 27.216] (--) NVIDIA(GPU-0):
[ 27.216] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 27.216] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 27.216] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 27.216] (--) NVIDIA(GPU-0):
[ 36.848] (II) systemd-logind: got pause for 13:68
[ 36.848] (II) systemd-logind: got pause for 13:64
[ 36.848] (II) systemd-logind: got pause for 226:0
[ 36.848] (II) systemd-logind: got pause for 13:69
[ 36.848] (II) systemd-logind: got pause for 13:66
[ 36.848] (II) systemd-logind: got pause for 13:67
[ 36.848] (II) systemd-logind: got pause for 13:65
Put the fun back into computing.
Arch 64bit con Cinnamon/Xfce4.12 su ASUS X52JB (Intel Pentium P6100, 4Gb RAM e ATI Mobility Radeon HD 5145)
Arch 64bit con Cinnamon (Intel Core i5-4690K e Asus nVidia GTX-970 Strix Direct CU II OC)
Arch 64bit con Cinnamon/Xfce4.12 su ASUS X52JB (Intel Pentium P6100, 4Gb RAM e ATI Mobility Radeon HD 5145)
Arch 64bit con Cinnamon (Intel Core i5-4690K e Asus nVidia GTX-970 Strix Direct CU II OC)
Re: Impostare frequenza di aggiornamento verticale monitor
Mi fa piacere. Riguardo ai motivi di tutto questo, rimango della mia idea esposta sopra, ma sarebbe da chiederne conferma ai devs di nvidia-xsettings.
4javier ha scritto:Ho dato un'occhiata al man della configurazione di Xorg per i driver proprietari nvidia, ed ho notato che da nessuna parte cita la possibilità di impostare a frequenza di refresh nei metamode. Ho il sospetto che sia stata totla questa possibilità nei nuovi driver, ma che non sia stato aggiornato il programma di configurazione. Ma è solo un'ipotesi. Apri /etc/X11/xorg.conf, e nella sezione Monitor, modifica questa riga
Offertissima: Mi Vendo!!! Cercasi lavoro o corso di formazione finanziato in tutta italia da Roma in su, oppure in provincia di Catanzaro.
In particolare sono interessato ad opportunità su Roma.
In particolare sono interessato ad opportunità su Roma.